CONSTRUCTION
An oil passage is provided in the intake camshaft in order to supply engine oil pressure to the VVT-i system.
A camshaft timing sprocket assembly is installed on the front of the intake camshaft to vary the timing of the intake valves.
A timing rotor for the camshaft position sensor is provided at the back end of the intake camshaft.
| *1 | Camshaft Timing Sprocket Assembly
(VVT-i Controller) |
*2 | Camshaft (Intake Camshaft) |
| *3 | Timing Rotor | *4 | Camshaft Timing Gear or Sprocket |
| *5 | No.2 Camshaft (Exhaust Camshaft) | - | - |
| *a | Oil Passage (Advance) | *b | Oil Passage (Retard) |