CONSTRUCTION
Terne-coated carbon steel sheeting was used for the construction of the fuel tank, which has a 45 liter (47.6 US qts, 39.6 Imp. qts) capacity. Additionally, super tin-zinc was used for the construction of fuel tanks for vehicles for Thailand to allow them to use E20 gasoline, which contains 20% ethanol.
The fuel inlet installation section is provided at the rear/upper section of the fuel tank.
To prevent fuel from flowing out, a fuel cut off valve assembly is provided at the top of the fuel tank and a fuel tank filler check valve sub-assembly is provided inside the fuel inlet.
| *1 | Fuel Tank Assembly | *2 | Fuel Inlet Pipe |
| *3 | Fuel Tank Filler Check Valve Sub-assembly | *4 | Fuel With Motor And Bracket Pump Assembly |
| *5 | Fuel Cut Off Valve Assembly | - | - |