Home › Engine / Hybrid System › 3SZ-VE EMISSION CONTROL › EMISSION CONTROL SYSTEM › 2011.11–2015.08
NM19Y0E _51 Engine / Hybrid System _003179 3SZ-VE EMISSION CONTROL _0016004 EMISSION CONTROL SYSTEM GE GENERAL F

3SZ-VE EMISSION CONTROL  EMISSION CONTROL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

Exhaust Emission Control System

·

Three-Way Catalytic Converter (TWC) is used to reduce emissions in the exhaust gas.

·

Based on the signal from the heated oxygen sensor, the ECM controls the fuel injection volume in order to optimize the emissions in the exhaust gas.

·

Vehicles for Thailand and Mexico have been fitted with one O2 sensor on the exhaust manifold and one on the front exhaust pipe assembly. This provides more granular control of the air-fuel ratio, for compliance with EURO 4 emission regulations.



b.

Evaporative Emission Control System

·

A canister purge has been used, which sucks fuel vapor emitted inside the fuel tank into the intake ports to combust.

·

The ECM controls the purge flow of evaporative emissions (HC) in the canister in accordance with engine conditions.