FUNCTION OF MAIN COMPONENTS
The main components of the emission control system are as follows:
| Component | Function | |
|---|---|---|
| Exhaust Emission Control System | ECM | Determines an optimal fuel injection volume based on the signals from various sensors. |
| TWC | Reduces CO, HC and NOx in the exhaust gas. | |
| Heated Oxygen Sensor (Bank 1, Sensor 1) | Detects the oxygen concentration in the exhaust emissions by measuring the electromotive force generated in the sensor itself. For details, see the 3SZ-VE Engine Control. | |
| Heated Oxygen Sensor (Bank 1, Sensor 2)* | ||
| Evaporative Emission Control System | ECM | Sends signals to the Purge VSV to control the purge flow. |
| Manifold Absolute Pressure Sensor | Detects the intake manifold pressure. For details, see the 3SZ-VE Engine Control. | |
| Canister | Contains activated charcoal to absorb the fuel vapor created in the fuel tank assembly. | |
| Purge VSV | Opens in accordance with the signals from the ECM when the system is purging, in order to send the fuel vapor that was absorbed by the canister into the intake manifold. | |
*: Models for Thailand and Mexico