Home › Engine / Hybrid System › K3-VE EMISSION CONTROL › EMISSION CONTROL SYSTEM › 2011.11–2015.08
NM19Y0E _51 Engine / Hybrid System _003180 K3-VE EMISSION CONTROL _0016005 EMISSION CONTROL SYSTEM CO CONTROL F

K3-VE EMISSION CONTROL  EMISSION CONTROL SYSTEM  CONTROL  EXHAUST EMISSION CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the emission control system are as follows:

Component Function
Exhaust Emission Control System ECM Determines an optimal fuel injection volume based on the signals from various sensors.
TWC Reduces CO, HC and NOx in the exhaust gas.
Heated Oxygen Sensor (Bank 1, Sensor 1) Detects the oxygen concentration in the exhaust emissions by measuring the electromotive force generated in the sensor itself. For details, see the K3-VE Engine Control.
Evaporative Emission Control System ECM Sends signals to the Purge VSV to control the purge flow.
Manifold Absolute Pressure Sensor Detects the intake manifold pressure. For details, see the K3-VE Engine Control.
Canister Contains activated charcoal to absorb the fuel vapor created in the fuel tank assembly.
Purge VSV Opens in accordance with the signals from the ECM when the system is purging, in order to send the fuel vapor that was absorbed by the canister into the intake manifold.