Home › Engine / Hybrid System › K3-VE INTAKE / EXHAUST › INTAKE SYSTEM › 2011.11–2015.08
NM19Y0E _51 Engine / Hybrid System _003181 K3-VE INTAKE / EXHAUST _0016006 INTAKE SYSTEM DE DETAILS F

K3-VE INTAKE / EXHAUST  INTAKE SYSTEM  DETAILS  THROTTLE BODY  


CONSTRUCTION


a.

A down draft type throttle body has been adopted. By installing the throttle body directly to the cylinder head via a bracket, vibration has been reduced.


b.

A resin throttle link, idle speed control valve, and compact throttle position sensor have been adopted to improve weight reduction.


c.

Vehicles equipped with heaters have been fitted with coolant circulation systems to cycle engine coolant through the throttle body, a measure intended to stabilize the operation of cooling mechanisms.


d.

A rotary solenoid type idle speed control valve is used to adjust the airflow through the throttle valve bypass, regulating the target idle speed to suit the engine state.

W109764C01
0.792,0.542 0.906,0.542 0.906,0.542 1.115,0.844 true 0.427,0.958 0.542,0.958 0.542,0.958 0.698,1.188 true 2.073,1.927 2.333,1.625 2.333,1.625 2.5,1.625 true 4.26,0.708 4.396,0.708 4.396,0.708 4.542,0.885 true 3.833,1 3.958,1 3.958,1 4.125,1.229 true 5.458,1.958 5.74,1.729 5.74,1.729 5.906,1.729 true 3.49,0.583 3.802,0.74 0.313,0.156 10 *A 4.031,0.635 4.271,0.813 0.24,0.177 10 *1 0.563,0.479 0.875,0.635 0.313,0.156 10 *1 0.125,0.896 0.438,1.052 0.313,0.156 10 *2 2.594,1.542 2.906,1.698 0.313,0.156 10 *3 3.594,0.917 3.823,1.083 0.229,0.167 10 *2 3.979,1.51 4.292,1.667 0.313,0.156 10 *a 3.958,1.885 4.271,2.042 0.313,0.156 10 *b 5.979,1.656 6.292,1.854 0.313,0.198 10 *3
*A Models with Heater - -
*1 Throttle Position Sensor *2 Idle Speed Control Valve
*3 Throttle Link - -
*a To Coolant Pipe *b From Coolant Pipe