CONSTRUCTION
A down draft type throttle body has been adopted. By installing the throttle body directly to the cylinder head via a bracket, vibration has been reduced.
A resin throttle link, idle speed control valve, and compact throttle position sensor have been adopted to improve weight reduction.
Vehicles equipped with heaters have been fitted with coolant circulation systems to cycle engine coolant through the throttle body, a measure intended to stabilize the operation of cooling mechanisms.
A rotary solenoid type idle speed control valve is used to adjust the airflow through the throttle valve bypass, regulating the target idle speed to suit the engine state.
| *A | Models with Heater | - | - |
| *1 | Throttle Position Sensor | *2 | Idle Speed Control Valve |
| *3 | Throttle Link | - | - |
| *a | To Coolant Pipe | *b | From Coolant Pipe |