Home › Engine / Hybrid System › K3-VE LUBRICATION › LUBRICATION SYSTEM › 2011.11–2015.08
NM19Y0E _51 Engine / Hybrid System _003185 K3-VE LUBRICATION _0016012 LUBRICATION SYSTEM GE GENERAL F

K3-VE LUBRICATION  LUBRICATION SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The lubrication circuit is fully pressurized and all oil passes through an oil filter sub-assembly.


b.

The trochoid gear type oil pump assembly is driven directly by the chain sub-assembly.


c.

For simpler construction and reduced overall length of the engine, chamber for the oil pump rotor and a relief valve have been provided in the cylinder block.


d.

The oil filter sub-assembly has been installed horizontally from the side of the cylinder block.

W104933C01
2.5,1.51 1.771,0.698 1.771,0.698 1.594,0.698 true 2.021,1.677 0.927,1.531 0.927,1.531 0.76,1.531 true 2.781,1.906 2.646,0.323 2.646,0.323 2.479,0.323 true 2.563,2.104 0.708,2.365 0.708,2.365 0.542,2.365 true 3.313,3.365 3.688,4.313 3.688,4.313 3.854,4.313 true 3.583,3.323 4.99,3.875 4.99,3.875 5.167,3.875 true 3.979,3.802 4.479,4.354 4.479,4.354 4.656,4.354 true 4.573,2.833 6.042,3.479 6.042,3.479 6.219,3.479 true 0.354,2.25 0.74,2.427 0.385,0.177 10 *4 0.573,1.396 0.958,1.573 0.385,0.177 10 *3 1.396,0.552 1.781,0.729 0.385,0.177 10 *2 2.313,0.219 2.698,0.396 0.385,0.177 10 *1 3.906,4.229 4.292,4.406 0.385,0.177 10 *5 5.219,3.76 5.604,3.938 0.385,0.177 10 *7 4.708,4.271 5.094,4.448 0.385,0.177 10 *6 6.281,3.385 6.667,3.563 0.385,0.177 10 *8
*1 Oil Control Valve Filter *2 Camshaft Timing Sprocket Assembly
*3 Cam Timing Oil Control Valve Assembly *4 Chain Tensioner Plunger
*5 Oil Pump Assembly *6 Oil Strainer Sub-assembly
*7 Relief Valve *8 Oil Filter Sub-assembly
V100135

Oil Flow - -