CONTRUCTION
In order to provided a hydraulic pressure that is proportion to current that flows to the solenoid coil, No.1 clutch control solenoid assembly (SL2, SL3) and No.2 clutch control solenoid assembly (SL3) linearly controls the line pressure and clutch and brake engagement pressure based on the signals it receives from the TCM.
The No.1 clutch control solenoid assembly (SL2) and No.1 clutch control solenoid assembly (SL3) have the same basic structure.
| Clutch Control Solenoid | Action | Function |
|---|---|---|
| SL1 | For brake engagement pressure control | Controls the hydraulic pressure to the B1 brake. |
| SL2 | For clutch engagement pressure control | Controls the hydraulic pressure to the C2 clutch. |
| SL3 | For line pressure control | Controls the line pressure, which controls hydraulic pressure to the C3 clutch and B2 brake. |
The lock up control solenoid assembly (DSU) is a duty-cycle type that controls the hydraulic pressure to the lock-up clutch by opening and closing the fluid passage in accordance with the duty-cycle signals provided by the TCM.
Transmission three-way Solenoid Assembly (SL, SR) uses a three-way solenoid valve.
When the transmission three-way solenoid assembly is ON, the fluid passage opens in order to apply hydraulic pressure. When it is OFF, the fluid passage closes and releases the applied hydraulic pressure.
Transmission three-way solenoid assembly (SL, SR) have the same basic structure.
| Clutch Control Solenoid | Action | Function |
|---|---|---|
| SL | For fluid passage switching control | Switches the LUC relay valve. |
| SR | Switches the solenoid relay valve. |