Home › Drivetrain › A4Q AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSMISSION SYSTEM › 2011.11–2015.08
NM19Y0E _52 Drivetrain _003189 A4Q AUTOMATIC TRANSMISSION / TRANSAXLE _0016016 AUTOMATIC TRANSMISSION SYSTEM DE DETAILS F

A4Q AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM  DETAILS  SPEED SENSOR  


CONTRUCTION


a.

The A4Q automatic transmission is used an input speed sensor and an output speed sensor. Thus, the TCM can detect the timing of the shifting of the gears and appropriately control the engine torque and hydraulic pressure in response to the various conditions.


b.

The input speed sensor detects the input speed of the transmission. The front clutch drum is used as the timing rotor for this sensor.


c.

The output speed sensor detects the speed of the output shaft. The parking lock gear is used as the timing rotor for this sensor.


d.

The speed sensor mainly consists of the hall IC and magnet. The hall IC converts the changes in the magnetic flux that are caused by the rotation of the timing rotor into electric signals, and outputs them to the TCM.

X106694C01
4.104,0.875 4.604,0.396 true 3.688,0.979 3.063,0.458 true 4.417,1.177 4.906,1.292 true 3.885,1.5 4.375,2.219 true 4.656,0.292 4.969,0.51 0.313,0.219 10 *4 2.885,0.365 3.229,0.635 0.344,0.271 10 *1 4.958,1.229 5.26,1.479 0.302,0.25 10 *3 4.417,2.24 4.76,2.521 0.344,0.281 10 *2
*1 Front Clutch Drum *2 Transmission Revolution Sensor (Input Speed Sensor)
*3 Transmission Revolution Sensor (Output Speed Sensor) *4 Parking Lock Gear