Home › Drivetrain › CLUTCH › CLUTCH SYSTEM › 2011.11–2015.08
NM19Y0E _52 Drivetrain _003190 CLUTCH _0016017 CLUTCH SYSTEM GE GENERAL F

CLUTCH  CLUTCH SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A dry type single plate clutch which is operated by cable is used on the K3-VE engine models.


b.

A dry type single plate clutch which is operated by hydraulic pressure is used on the 3SZ-VE engine models.

X106704
0.5,0.281 0.885,0.594 0.385,0.313 10 *A 3.771,0.281 4.219,0.688 0.448,0.406 10 *B
*A Models with K3-VE engine *B Models with 3SZ-VE engine




SPECIFICATION


Engine Type K3-VE 3SZ-VE
Transmission Type M5S
Clutch Type Dry Type
Single Plate Clutch
Diaphragm Spring
←
Operation Mechanical (Cable) Hydraulic Pressure
Clutch Cover Type DST*1 ←
Size 190 mm (7.5 in.) 200 mm (7.9 in.)
Installed Load 3550 N 3120 N
Clutch Disc Facing Size*2 190 mm x 132 mm x 3.5 mm (7.5 in. x 5.2 in. x 0.14 in.) 200 mm x 140 mm x 3.5 mm (7.9 in. x 5.5 in. x 0.14 in.)
Master Cylinder Type - Plunger
Cylinder Diameter - 15.87 mm (0.62 in.)
Release Cylinder Type - Non-adjustable
Cylinder Diameter - 20.64 mm (0.81 in.)

HINT:

*1: DST (Diaphragm Spring Turnover)

*2: Outer diameter x Inner diameter x Thickness