CONSTRUCTION
The front suspension support sub-assembly transmits the load that is applied via the spring and shock absorber assembly through its metal structure.
The upper insulator with an integrated dust cover has been introduced to reduce the noise transmitted from the road surface.
The rebound stopper has been introduced to enhance the steering stability.
A pigtail type of front coil spring with a small top diameter is used, creating a compact and lightweight construction.
| *1 | Rebound Stopper | *2 | Front Suspension Support Sub-assembly |
| *3 | Dust Cover | *4 | Front Coil Spring |
| *5 | Front Shock Absorber | - | - |