OUTLINE
A 4-link coil spring with the lateral rod type rigid axle suspension is used.
Through the optimal allocation of components, the rear suspension realizes excellent stability, controllability and riding comfort.
Low-pressure (N2) gas sealed shock absorber have been adopted to improve response.
To prevent injury or hazard when discarding a low-pressure (N2) gas sealed shock absorber, make sure to remove the gas before disposal. For details, refer to the corresponding repair manual.
MAIN FEATURES
Axle Steer
Axle steer is a condition in which the operation of the rear axle changes when the vehicle body rolls during cornering, creating the same effect as if the vehicle was steered.
The rear upper arm has a sharp frontal inclination, and the rear lower arm is long and nearly horizontal. Thus, during a bound, the axle housing advances forward due to the curve that is drawn by the axle housing's rear upper arm attachment portion.
For this reason, when the vehicle body rolls during cornering, the rear upper arm of the outer wheel will have a sharper frontal inclination, causing the outer wheel side of the axle housing to greatly advance forward. And the rear upper arm becomes nearly horizontal, the inner wheel side of the axle housing will not move very much.
As a result, the axle housing will have steered in the same phase as that of the front tires. Accordingly, the tire's slip angle increases, and a cornering force is generated in the rear wheels, thus realizing excellent maneuverability.