Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM › 2011.11–2016.09
NM19Y0E _54 Brake _003197 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0016025 BRAKE CONTROL SYSTEM CO CONTROL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  CONTROL  BRAKE CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Brake Actuator Assembly Skid Control ECU Judges the vehicle driving condition based on the signals from each sensor and switch, and sends brake control signals to the brake actuator.
Solenoid Relay (Built into Skid Control ECU) Supplies power to the solenoid valves.
Motor Relay (Built into Skid Control ECU) Supplies power to the pump motor.
Solenoid Valve Changes the fluid path based on the signals from the skid control ECU during the operation of the brake control system, in order to control the fluid pressure applied to the wheel cylinders.
Pump Motor Drives the pumps inside the brake actuator.
Speed Sensors Detect the wheel speed of each of the 4 wheels.
Stop Light Switch Assembly Detects the brake pedal depressing signal.
Parking Brake Switch Assembly Detects the parking brake lever status.
Brake Fluid Level Warning Switch Detects the brake fluid level.
Combination Meter Assembly Brake Warning Light
·

Illuminates to alert the driver when the skid control ECU detects a malfunction in the EBD or brake system.

·

Illuminates to alert the driver when the brake fluid level is low.

·

Illuminates to inform the driver when the parking brake lever is pulled up.


ABS Warning Light Illuminates to alert the driver when the skid control ECU detects a malfunction in the ABS.


SYSTEM CONTROL


Control Outline
Anti-lock Brake System (ABS) The ABS helps prevent the wheels from locking when the brakes are applied firmly or when braking on a slippery surface.
Electronic Brake Force Distribution (EBD) The EBD control utilizes ABS, achieving proper brake force distribution between the front and rear wheels in accordance with the driving conditions. In addition, during braking while cornering, it also controls the brake forces of the right and left wheels, helping maintain vehicle behavior.

a.

Anti-lock Brake System (ABS)

i.

The ABS prevents the wheels from locking during sudden braking or braking on a slippery surface. This provides the proper braking force when the vehicle slips, thus ensuring vehicle stability and excellent braking performance.

X102923C02
1.448,2.333 2.667,3.25 1.219,0.917 12 *B: 1.448,1.031 2.615,1.844 1.167,0.813 12 *A: 4.573,0.969 5.24,1.51 0.667,0.542 10 *a
*A Models with ABS *B Models without ABS
*a Brake Operation - -




b.

Electronic Brake Force Distribution (EBD)

i.

This function controls the brake force that acts on the rear wheels in accordance with the changes in the vehicle conditions such as load factors or deceleration, in order to ensure excellent braking performance.

X100697E03
1.938,1.708 1.771,1.708 1.771,1.708 1.771,2.552 false 4.917,1.406 4.74,1.406 4.74,1.406 4.74,2.375 false 2.375,2.646 2.198,2.646 2.198,2.646 2.031,2.5 false 5.458,2.573 5.281,2.573 5.281,2.573 5.115,2.427 false 0.594,2.094 1.417,3.156 0.823,1.063 10 Rear Brake Force 3.604,2.083 4.365,3.25 0.76,1.167 10 Rear Brake Force 1.979,1.625 3.177,2.677 1.198,1.052 10 Ideal Brake Force Distribution 4.969,1.313 6.594,2.292 1.625,0.979 10 Ideal Brake Force Distribution 2.417,2.563 3.573,3.25 1.156,0.688 10 EBD Control 5.521,2.49 6.781,3.229 1.26,0.74 10 EBD Control 1.688,2.927 3.573,3.604 1.885,0.677 10 Front Brake Force 4.708,2.927 6.469,3.646 1.76,0.719 10 Front Brake Force 1.573,3.313 3.656,3.802 2.083,0.49 10 Without Load in Rear 4.781,3.323 6.333,3.792 1.552,0.469 10 With Load in Rear


ii.

During cornering braking, this function controls the brake force that acts on the left and right wheels in accordance with the vehicle conditions at that time. This ensures vehicle stability and excellent braking performance.

X102924
6.844,2.667 6.979,2.667 false
V100135

Brake Force
V100136

Control Moment





FAIL-SAFE


a.

If a failure occurs in the skid control ECU, sensors, or brake actuator assembly, the system continues effecting brake control by excluding the failed area and using only the areas that are operating normally.



DIAGNOSIS


a.

If the skid control ECU detects a malfunction in the brake control system, the warning lights or indicator light illuminate. At the same time, a Diagnostic Trouble Code (DTC) is stored in the memory of the skid control ECU.


b.

This system has a sensor signal check (test mode) function.


c.

For details of DTCs and the check function, refer to the corresponding Repair Manual for this model.