Home › Steering › STEERING COLUMN › STEERING COLUMN SYSTEM › 2011.11–2015.08
NM19Y0E _55 Steering _003203 STEERING COLUMN _0016031 STEERING COLUMN SYSTEM DE DETAILS F

STEERING COLUMN  STEERING COLUMN SYSTEM  DETAILS  STEERING COLUMN ASSEMBLY  


CONSTRUCTION


a.

Manual Tilt Mechanism

i.

The manual tilt mechanism allows adjustment of the steering wheel position in the vertical direction through lever operation. This provides the driver with the most comfortable driving position.


ii.

The manual tilt mechanism is locked using the tilt lever.

X106587
3.948,1.781 4.302,2.042 4.302,2.042 4.458,2.042 true 4.49,1.969 5.177,2.51 0.688,0.542 10 *1 3.802,2.479 4.427,2.792 0.625,0.313 10 *a 4.958,0.729 5.698,1.313 0.74,0.583 10 *b
*1 Tilt Lever - -
*a Tilt Mechanism *b Range of Movement is 30.0 mm (1.2 in)




b.

Steering Intermediate Shaft Assembly

i.

By using a contractible steering intermediate shaft assembly that deforms and contracts during collisions, safety during collisions is ensured and a smooth steering feeling is achieved.

X106588



c.

Energy Absorbing Mechanism

i.

The energy absorbing mechanism mainly consists of the upper bracket, lower bracket, steering intermediate shaft assembly, and steering column assembly. The steering column assembly is mounted on the instrument panel reinforcement via a upper bracket. The steering column assembly and the steering gear assembly are connected with a contractile steering intermediate shaft assembly.


ii.

When the steering gear assembly moves during a collision (primary collision), the steering intermediate shaft assembly contracts, thus helping reduce the possibility of the steering column assembly and the steering wheel protruding into the cabin.

X106589C02
2.146,3.094 1.656,2.594 1.656,2.594 1.469,2.594 true 4.5,1.5 3.771,0.271 3.771,0.271 3.594,0.271 true 4.313,1.781 5.302,2.646 5.302,2.646 5.49,2.646 true 4.146,1.542 2.979,0.708 2.979,0.708 2.802,0.708 true 3.615,1.854 2.302,1.24 2.302,1.24 2.125,1.24 true 1.292,2.531 2.031,3.094 0.74,0.563 10 *4 3.417,0.208 4.302,0.906 0.885,0.698 10 *1 5.521,2.563 6.375,3.365 0.854,0.802 10 *5 1.26,4.042 2.063,4.927 0.802,0.885 10 *a 3.844,5.219 4.49,5.823 0.646,0.604 10 *b 2.615,0.625 3.396,1.24 0.781,0.615 10 *2 1.927,1.167 2.802,1.813 0.875,0.646 10 *3
*1 Upper Bracket *2 Instrument Panel Reinforcement
*3 Lower Bracket *4 Steering Intermediate Shaft Assembly
*5 Steering Column Assembly - -
*7 Before Collision *b After Collision
V100135

Contract - -



iii.

When a collision impact is transmitted to the steering wheel (secondary collision), the steering wheel helps absorb the impact. In addition, the slide plate separates from the upper bracket and steering column assembly, causing the entire steering column assembly to move forward. This sequential energy absorbing mechanism helps absorb the impact of the secondary collision.

X106600
4.365,1.021 4.677,0.469 4.677,0.469 4.854,0.469 true 4.104,1.156 3.458,0.313 3.458,0.313 3.271,0.313 true 2.615,1.49 1.969,0.646 1.969,0.646 1.792,0.646 true 3.635,1.531 4.094,2.385 4.094,2.385 4.271,2.385 true 3.344,2.469 4.073,3.031 0.729,0.563 10 *a 3.344,5.146 4.115,5.802 0.771,0.656 10 *b 4.333,2.313 5.167,3.063 0.833,0.75 10 *4 4.896,0.385 5.656,1.052 0.76,0.667 10 *3 3.094,0.219 3.875,0.917 0.781,0.698 10 *2 1.625,0.563 2.281,1.302 0.656,0.74 10 *1
*1 Lower Bracket *2 Upper Bracket
*3 Slide Plate *4 Steering Column Assembly
*a Before Collision *b After Collision
V100136

Secondary Collision - -