FUNCTION OF MAIN COMPONENTS
The main components of the power door lock control system have the following functions:
| Component | Function | |
|---|---|---|
| Door Control Relay Assembly*1 | Drives all door lock motors in response to signals. | |
| Door Control Receiver*2 | ||
| Door Lock Assembly | Door Lock Motor | Drives the motor in response to signals from the door control relay assembly*1 or door control receiver*2 and locks or unlocks the doors. |
| Door Lock Switch | Sends a lock or unlock request signal to the door control relay assembly*1 or door control receiver*2 by operation of the door key cylinder or the door lock knob. | |
| Door Courtesy Light Switch Assembly*2 | Detects whether the doors are open or closed and sends this information to the door control receiver. | |
*1: Models without wireless door lock control system
*2: Models with wireless door lock control system
FUNCTION
The power door lock control system has the following functions:
| Function | Outline |
|---|---|
| Manual Lock and Unlock | This function can lock or unlock all doors by operation of the driver door lock knob. |
| Key-linked Lock and Unlock | This function, linked with the driver door key cylinder, can lock or unlock all the doors when a lock or unlock operation is effected. |
| Key Confinement Prevention* | When the key is inserted in the ignition key cylinder with the driver's door open and if you perform the door lock operation, all the doors will be unlocked. |
*: Models with wireless door lock control system