CONSTRUCTION
A reclining mechanism has been adopted for the rear No.1 seat. It has also been fitted with a sliding mechanism in some models depending on specifications.
The rear No.1 seatbacks are concave to create a sculpted appearance and provide additional knee room to the rear No. 2 seat passengers.
The one-touch tumble operation of the rear No. 2 seat allows for easy entry and exit.
Saddle headrests have been fitted to South African models.
Seat-slide mechanism
The seat-slide mechanism offers an adjustment range of 60 mm (2.4 in.) to provide additional seating space for the rear No. 1 seat.
| *A | Models for South Africa | - | - |
One-touch tumble mechanism
The one-touch tumble operation is as follows.
Operate the rear No. 1 seat lock control lever to recline the seat back forward. (1)
A seat-cushion linkage mechanism that moves in conjunction with the forward folding of the seatback unlocks the cushion fixing lock when the wire is pulled. The spring force of the spring mounted in the seat legs then causes the seat-cushion to pop upward. (2)
Lift the rear No. 1 seat cushion assembly and rear No. 1 seat back assembly to tumble the rear No. 1 seat. (3)
| *1 | Rear No. 1 Seat Back Frame Sub-assembly LH | *2 | Wire |
| *3 | Rear No. 1 Seat Cushion Lock Assembly LH | *4 | Rear No. 1 Seat Lock Control Lever |
| *5 | Rear No. 1 Seat Back Assembly | *6 | Rear No. 1 Seat Leg Sub-assembly LH |