Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM › 2011.11–2015.08
NM19Y0E _58 Vehicle Interior _003212 HEATING / AIR CONDITIONING _0016041 AIR CONDITIONING SYSTEM GE GENERAL F

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The air conditioning system main components have been made compact, lightweight, and highly efficient to realize a combination of ensuring comfort and enhancing actual fuel consumption.



SPECIFICATION


a.

Single Air Conditioning Model

i.

Performance

Unit Front
Heater*1 Heater Output W 3650
Air Flow Volume m3/h 230
Power Consumptior W 170
Cooler Cooling Capacity W 4330*1
4550*2
Air Flow Volume m3/h 410*1
435*2
Power Consumption W 210

*1 : Models with heater

*2 : Models without heater


ii.

Ventilation and Heater Radiator Unit Sub-assembly

Unit Front
Heater Radiator Unit Sub-assembly*1 Type Straight Flow Aluminum (SFA)-II
Size
W x H x L
mm (in.) 211.9 x120 x 21
(8.3 x 4.7 x 0.9)
Fin Pitch mm (in.) 1.8 (0.07)
Blower Motor Assembly Motor Type K62F-12.5T*1
K62F-13.5T*2
Fan Type Semi Sirocco
Fan Size (Dia. x H) mm (in.) 145 x 65 (5.7 x 2.6)

*1 : Models with heater

*2 : Models without heater


iii.

Air Conditioning

Unit Front
Cooler Condenser Assembly Type Multi-Flow (MF)-IV
Size
W x H x L
mm (in.) 360 x 376.6 x 16 (14.2 x 14.8 x 0.6)*1
460 x 376.6 x 16 (18.1 x 14.8 x 0.6)*2
Fin Pitch mm (in.) 2.75 (0.11)
Cooler Evaporator Sub-assembly Type Revolutionary super-slim Structure (RS)
Size
W x H x L
mm (in.) 226.1 x 231 x 38 (8.9 x 9.1 x 1.5)*3
226.1 x 191 x 38 (8.9 x 7.1 x 1.5)*4
Fin Pitch mm (in.) 3.0 (0.12)
W/Pulley Compressor Assembly Type 10SA13C
Pulley Steel with Magnetic Clutch
Refrigerant Type HFC 134a
Charge Volume g Single: 330+/-30*5
Single: 370+/-30*6
Dual: 450+/-30*5
Dual: 490+/-30*6

*1 : Models with K3-VE engine. However, except models with manual transmission for LHD general countries

*2 : Models with 3SZ-VE engine and models with manual transmission for LHD general countries

*3 : Models without heater

*4 : Models with heater

*5 : RHD models

*6 : LHD models



b.

Dual Air Conditioning Model

i.

Performance

Unit Front Rear
Heater*1 Heater Output W 3650 -
Air Flow Volume m3/h 230 -
Power Consumptior W 170 -
Cooler Cooling Capacity W 4330*1
4550*2
-
Air Flow Volume m3/h 410*1
435*2
120
Power Consumption W 210 30

*1 : Models with heater

*2 : Models without heater


ii.

Ventilation and Heater Radiator Unit Sub-assembly

Unit Front Rear
Heater Radiator Unit Sub-assembly*1 Type Straight Flow Aluminum (SFA)-II -
Size
W x H x L
mm (in.) 211.9 x120 x 21
(8.3 x 4.7 x 0.9)
-
Fin Pitch mm (in.) 1.8 (0.07) -
Blower Motor Assembly Motor Type K62F-12.5T*1
K62F-13.5T*2
S50FS-38T
Fan Type Semi Sirocco Cross Flow
Fan Size (Dia. x H) mm (in.) 145 x 65(5.7 x 2.6) 62 x 301 (2.4 x 11.9)

*1 : Models with heater

*2 : Models without heater


iii.

Air Conditioning

Unit Front Rear
Cooler Condenser Assembly Type Multi-Flow (MF)-IV
Size
W x H x L
mm (in.) 360 x 376.6 x 16 (14.2 x 14.8 x 0.6)*1
460 x 376.6 x 16 (18.1 x 14.8 x 0.6)*2
Fin Pitch mm (in.) 2.75 (0.11)
Cooler Evaporator Sub-assembly Type Revolutionary super-slim Structure (RS) Plate Fin
Size
W x H x L
mm (in.) 226.1 x 231 x 38 (8.9 x 9.1 x 1.5)*3
226.1 x 191 x 38 (8.9 x 7.1 x 1.5)*4
300 x 96.9 x 40
(11.8 x 3.8 x 1.6)
Fin Pitch mm (in.) 3.0 (0.12) 1.8 (0.07)
W/Pulley Compressor Assembly Type 10SA13C
Pulley Steel with Magnetic Clutch
Refrigerant Type HFC 134a
Charge Volume g Single: 330+/-30*5
Single: 370+/-30*6
Dual: 450+/-30*5
Dual: 490+/-30*6

*1 : Models with K3-VE engine. However, except models with manual transmission for LHD general countries

*2 : Models with 3SZ-VE engine and models with manual transmission for LHD general countries

*3 : Models without heater

*4 : Models with heater

*5 : RHD models

*6 : LHD models




MAIN FEATURES


a.

The air conditioning system has the following features:

High Performance
·

The blower control has 4 steps to allow precise control.

·

The roof fan (rear cooling unit assembly) is used. This fan sends air from the center register to the rear seats.


Others The following parts are used to ensure high cooling performance while realizing a compact and lightweight construction.
·

Semi-center location air conditioning unit

·

Revolutionary super-slim Structure (RS) evaporator

·

Straight Flow Aluminum (SFA)-II heater radiator unit sub-assembly

·

Multi-Flow (MF)-IV sub-cool condenser assembly