CONSTRUCTION
The air conditioning unit assembly consists of the No.1 cooler evaporator sub-assembly, evaporator heater radiator unit sub-assembly*, temperature sensor and blower motor assembly.
*: Models with heater
A semi-center location air conditioning unit assembly, in which the no.1 cooler evaporator sub-assembly and heater radiator unit sub-assembly* are placed in the vehicle's longitudinal direction, is used.
*: Models with heater
| *A | RHD Models without heater | - | - |
| *1 | No.1 Cooler Evaporator Sub-assembly | - | - |
| *a | Rear View | *b | Side View |
|
Vehicle Front | - | - |
| *A | RHD models with heater | - | - |
| *1 | No.1 Cooler Evaporator Sub-assembly | *2 | Heater Radiator Unit Sub-assembly |
| *a | Rear View | *b | Side View |
|
Vehicle Front | - | - |
| *A | LHD models | - | - |
| *1 | No.1 Cooler Evaporator Sub-assembly | *2 | Heater Radiator Unit Sub-assembly |
| *a | Rear View | *b | Side View |
|
Vehicle Front | - | - |