Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BODY STRUCTURE › 2011.11–2013.07
NM19Y0E _59 Vehicle Exterior _003218 EXTERIOR PANELS / TRIM _0016048 BODY STRUCTURE DE DETAILS F

EXTERIOR PANELS / TRIM  BODY STRUCTURE  DETAILS  SOUND ABSORBING AND VIBRATION DAMPING MATERIAL  


CONSTRUCTION


a.

Wind noise has been reduced by decreasing the difference in height between the front pillar and the windshield glass, and between the front pillar and the door frame. (A - A cross section)


b.

The shape of the outer mirror has been optimized, and "dimension e" and "angle f" have been maximized to rectify airflow, reducing wind noise. (B - B cross section)


c.

Quarter wind outside molding has been used to eliminate gaps between the rear door and the quarter window glass. This has reduced wind noise caused by air blowing in, and also contributed to improve appearance. (C - C cross-section)

Y124452
0.302,4.094 0.375,4.094 0.375,4.094 0.417,3.74 true 1.188,3.615 1.323,3.427 1.323,3.427 1.469,3.427 true 1.656,4.667 1.813,4.917 1.813,4.917 1.927,4.917 true 2.74,3.844 2.865,3.844 2.865,3.844 3.052,4.146 true 4.885,3.792 4.74,3.792 4.74,3.792 4.656,4.219 true 5.521,4.01 5.625,3.604 5.625,3.604 5.781,3.604 true 6.469,3.99 6.583,3.583 6.583,3.583 6.719,3.583 true 0.146,4.031 0.469,4.354 0.323,0.323 10 *1 1.49,3.354 1.885,3.708 0.396,0.354 10 *2 1.958,4.865 2.448,5.292 0.49,0.427 10 *3 2.583,3.771 3.052,4.156 0.469,0.385 10 *4 4.927,3.729 5.323,4.052 0.396,0.323 10 *5 5.833,3.531 6.177,3.854 0.344,0.323 10 *6 6.76,3.5 7.156,3.844 0.396,0.344 10 *7 3.406,1.031 3.865,1.448 0.458,0.417 10 A 3.875,1.281 4.292,1.656 0.417,0.375 10 A 3.448,1.271 3.833,1.677 0.385,0.406 10 B 4.031,1.573 4.479,1.958 0.448,0.385 10 B 5.167,1.021 5.594,1.385 0.427,0.365 10 C 5.563,0.958 5.99,1.375 0.427,0.417 10 C 0.208,3.302 0.688,3.76 0.479,0.458 10 *a 0.531,3.333 0.958,3.698 0.427,0.365 10 *d 1.906,4.354 2.333,4.719 0.427,0.365 10 *d 2.344,3.323 2.865,3.771 0.521,0.448 10 *b 4.594,3.313 5.031,3.708 0.438,0.396 10 *c 3.823,3.51 4.26,3.865 0.438,0.354 10 *e 3.74,4.969 4.219,5.354 0.479,0.385 10 *f
*1 Windshield Glass *2 Side Panel Outer
*3 Door Frame *4 Outer Mirror
*5 Rear Door Glass *6 Quarter Window Outside Moulding
*7 Quarter Window Glass - -
*a A - A Cross Section *b B - B Cross Section
*c C - C Cross Section *d Minimal Level Difference
*e Dimension e *f Angle f



d.

An asphalt sheet is used to reduce road noise.

Y112316
6.833,5.729 6.979,5.729 false
V100145

Asphalt Sheet - -



e.

A dash brace (dash panel to cowl brace) has been applied to the dash panel to suppress panel vibration and reduce engine noise.


f.

A cowl brace (cowl top side reinforcement lower) has been applied to the cowl top panel inner to improve its rigidity and reduce vibration to the steering.

Y112327
3.229,0.875 3.438,0.365 3.438,0.365 3.542,0.365 true 2.51,1.625 2.938,2.781 2.938,2.781 3.01,2.781 true 3.448,3.552 3.979,2.927 3.979,2.927 4.031,2.927 true 3.792,4.021 3.052,4.76 3.052,4.76 2.948,4.76 true 3.625,0.281 4.073,0.688 0.448,0.406 10 *1 3.052,2.719 3.573,3.167 0.521,0.448 10 *2 4.063,2.865 4.563,3.302 0.5,0.438 10 *3 2.792,4.698 3.344,5.177 0.552,0.479 10 *4
*1 Dash Panel *2 Dash Panel to Cowl Brace
*3 Cowl Top Panel Inner *4 Cowl Top Side Reinforcement Lower



g.

A fender plate (front fender to cowl side seal) is provided between the side panel outer and the front fender panel. This prevents engine noise from entering the cabin, and achieves superior quietness. (A - A cross section)


h.

Soundproofing has been improved by the double-layer seal construction of the front door weatherstrip and the front door opening trim weatherstrip in the front door. (B - B cross section)

Y112328
1.021,4.365 0.896,4.104 0.896,4.104 0.813,4.104 true 1.448,4.75 1.167,4.896 1.167,4.896 1.125,4.896 true 1.146,5.292 1.281,5.427 1.281,5.427 1.323,5.427 true 2.219,5.281 2.354,5.417 2.354,5.417 2.396,5.417 true 5.688,4.427 6,3.906 6,3.906 6.031,3.906 true 5.323,4.99 5.135,5.24 5.135,5.24 5.094,5.24 true 4.479,0.594 5.073,1.104 0.594,0.51 10 B 4.604,1 5.125,1.438 0.521,0.438 10 B 3.865,1.781 4.271,2.156 0.406,0.375 10 A 4.302,1.688 4.656,2.021 0.354,0.333 10 A 0.625,3.365 1.083,3.771 0.458,0.406 10 *a 0.656,4.021 1.125,4.448 0.469,0.427 10 *3 0.948,4.813 1.375,5.24 0.427,0.427 10 *1 1.354,5.323 1.802,5.771 0.448,0.448 10 *2 2.427,5.313 2.958,5.74 0.531,0.427 10 *4 4.24,3.375 4.667,3.781 0.427,0.406 10 *b 6.052,3.823 6.531,4.302 0.479,0.479 10 *6 4.906,5.167 5.365,5.594 0.458,0.427 10 *5
*1 Front Fender to Cowl Side Seal *2 Front Fender Panel
*3 Side Panel Outer *4 Front Door Panel Sub-assembly
*5 Front Door Opening Trim Weatherstrip *6 Front Door Weatherstrip
*a A - A Cross Section *b B - B Cross Section



i.

The hood insulator*, dash panel outer insulator*, and dash panel insulator have a double layer of felt to reduce engine noise.

HINT:

*: Models with 3SZ-VE engine and for Malaysia


Y112329
0.958,1.635 0.813,0.729 0.813,0.729 0.729,0.729 true 6.042,1.969 6.375,1.188 6.375,1.188 6.469,1.188 true 1.521,3.833 1.094,4.271 1.094,4.271 1,4.271 true 0.281,0.656 0.917,1.094 0.635,0.438 10 *1 (*A) 6.5,1.125 6.885,1.469 0.385,0.344 10 *3 0.823,4.198 1.208,4.594 0.385,0.396 10 *2
*A Models with 3SZ-VE Engine and for Malaysia - -
*1 Hood Insulator *2 Dash Panel Outer Insulator
*3 Dash Panel Insulator - -



j.

A silencer has been applied to the roof panel to reduce rain noise.


k.

Urethane has been optimally arrayed within the cross-section of each section of the frame to reduce wind and road noise.

Y112330
2.479,2.302 0.948,1.125 0.948,1.125 2.229,1.49 true 3.771,2.74 4.698,4.083 4.698,4.083 4.802,4.083 true 3.01,1.188 3.406,0.313 3.406,0.313 3.417,0.323 true 3.417,0.313 4.177,0.885 true 3.698,1.01 3.406,0.302 true 0.74,1.031 1.313,1.479 0.573,0.448 10 *A 3.313,0.125 3.729,0.521 0.417,0.396 10 *1 4.823,4 5.313,4.479 0.49,0.479 10 *A
*A Models with 3SZ-VE Engine - -
*1 Roof Silencer - -
V100145

Sound-absorbing Material (Urethane) - -



l.

Sound absorbing materials and sound insulation materials have been placed optimally throughout the interior in consideration of silent operation. Besides, the thickness of the felt in the rear seat footwell increased* to improve noise vibration characteristics.

HINT:

*: Models with 3SZ-VE engine


Y112331
1.323,4.354 1.458,4.354 1.458,4.354 1.885,3.99 true 1.156,4.271 1.667,4.729 0.51,0.458 10 *a
*a Increased Thickness - -
V100145

Sound-absorbing Material - -



m.

Door trim seal has been applied to improve noise vibration characteristics.*

HINT:

*: Models with 3SZ-VE engine


Y112339C01
5.979,1.448 5.865,1.448 5.865,1.448 5.635,1.719 true 5.01,2.448 5.135,2.448 5.135,2.448 5.49,2.302 true 6.229,2.49 6.104,2.49 6.104,2.49 5.917,2.115 true 2.729,3.344 2.604,3.344 2.604,3.344 2.406,3.031 true 1.927,2.583 2.385,3.021 0.458,0.438 10 A 1.865,3.156 2.292,3.573 0.427,0.417 10 A 2.74,3.26 3.229,3.719 0.49,0.458 10 *2 4.854,2.354 5.354,2.74 0.5,0.385 10 *2 6,1.375 6.521,1.865 0.521,0.49 10 *1 6.229,2.427 6.792,3 0.563,0.573 10 *3 4.563,1.25 5.021,1.688 0.458,0.438 10 *a
*1 Front Door Trim *2 Door Trim Seal
*3 Front Door Scuff Plate - -
*a A - A Cross Section - -