Home › Engine / Hybrid System › K3-VE ENGINE CONTROL › SFI SYSTEM › 2011.11–2015.08
NM19Y0E _51 Engine / Hybrid System _003173 K3-VE ENGINE CONTROL _0015998 SFI SYSTEM DE DETAILS F

K3-VE ENGINE CONTROL  SFI SYSTEM  DETAILS  FUEL PUMP CONTROL  


OPERATION


a.

The fuel pump control is used to stop the fuel pump when the airbags deploy in a front collision.


b.

In this system, when the airbag deployment signal from the airbag sensor assembly is detected by the ECM, the ECM turns off the circuit opening relay.


c.

After the fuel cut control has been activated, turning the ignition switch from OFF to ON cancels the fuel cut control, and the engine can be restarted.

W105206E03
5.833,2.792 6.708,3.396 0.875,0.604 10 FUEL PUMP MOTOR 5.917,1.333 6.938,1.969 1.021,0.635 10 Circuit Opening Relay 6.042,0.531 7.156,0.844 1.115,0.313 10 EFI Main Relay 3.156,0.542 5.313,0.875 2.156,0.333 10 IGNITION SWITCH ASSEMBLY 4.469,1.177 5.083,1.479 0.615,0.302 10 ECM 2.125,1.167 3.646,1.781 1.521,0.615 10 CENTER AIRBAG SENSOR ASSEMBLY 0.271,1.167 1.635,1.792 1.365,0.625 10 FRONT AIRBAG SENSOR LH and RH 4.688,2.688 5.229,3.229 0.542,0.542 10 Battery Voltage 2,2.74 2.75,3.281 0.75,0.542 10 Airbag Not Deployed 2.031,3.51 2.677,4.104 0.646,0.594 10 Airbag Deployed 2.958,4.01 4.042,4.385 1.083,0.375 10 Approx. 3 sec.