CONSTRUCTION
Impact Absorbing Structure for Frontal Collision
The cabin has been constructed to limit deformation, with collision energy being dispersed through the upper apron member and the straight front side member, as well as through the use of stronger materials (in the door belt line reinforcement, lockers, floor members, and so on).
| *1 | Apron Upper Member | *2 | Front Side Member |
| *3 | Floor Member | *4 | Rocker |
| *5 | Door Belt Line Reinforcement | - | - |
|
Front Impact Energy | - | - |
Impact Absorbing Structure for Side Collision
The cabin has been constructed to limit deformation, with collision energy being dispersed through the rockers and pillars, and through the use of stronger materials (in the door belt line reinforcement, floor cross members, and so on).
| *1 | Door Belt Line Reinforcement | *2 | Floor Cross Member |
| *3 | Rocker | *4 | Body Pillar |
|
Side Impact Energy | - | - |
Brake pedal anti-back system
When the brake booster assembly section is pushed backwards during an impact, the clips (bolts) holding the instrument panel reinforcement and brake pedal support sub-assembly in place break away from the brake pedal support sub-assembly. The brake pedal support sub-assembly moves rearward and down along the guide plate. This is intended to move the pedal area of the brake pedal assembly downwards.
In an actual accident, it may not function depending on situations.
| *A | RHD Models | - | - |
| *1 | Instrument Panel Reinforcement | *2 | Bolt |
| *3 | Brake Pedal Support Sub-assembly | *4 | Brake Booster Assembly |
| *5 | Dash Panel | *6 | Guide Plate |
| *7 | Brake Pedal Assembly | - | - |
| *a | Normal Condition | *b | at Impact |
| *c | Pedal Area of the Brake Pedal Assembly | - | - |
Knee bolster
In the event of a frontal collision, the knee bolsters (No. 1 instrument panel safety pad and No. 2 instrument panel safety pad) wills absorb impact to the driver, reducing injury to the chest and lower extremities.
| *A | RHD Models | - | - |
| *1 | No. 1 Instrument Panel Safty Pad | *2 | No. 2 Instrument Panel Safty Pad |
| *3 | Instrument Panel Reinforcement | - | - |
| *a | Normal Condition | *b | at Impact |