CONSTRUCTION
A reclining mechanism has been adopted for the rear No. 1 seat. It has also been fitted with a sliding mechanism in some models depending on specifications.
The rear No. 1 seat back assemblies are concave to create a sculpted appearance and provide additional knee room to the rear No. 2 seat passengers.
The one-touch tumble operation of the rear No. 2 seat allows for easy entry and exit.
The headrests have position adjusting devices. *
*: Except for South African and Malaysian models
Seat-slide mechanism
The seat-slide mechanism offers an adjustment range of 60 mm (2.4 in.) to provide additional seating space for the rear No. 1 seat.
| *A | Position Adjustable Headrest | - | - |
One-touch tumble mechanism
The one-touch tumble operation is as follows.
Operate the rear No. 1 seat lock control lever to fold the rear No. 1 seat back assembly forward. (1)
A seat-cushion linkage mechanism that moves in conjunction with the forward folding of the rear No. 1 seat back assembly unlocks the cushion fixing lock when the wire is pulled. The spring force of the spring mounted in the seat legs then causes the seat-cushion to pop upward. (2)
Lift the rear No. 1 seat cushion assembly and rear No. 1 seat back assembly to tumble the rear No. 1 seat. (3)
| *1 | Rear No. 1 Seat Back Frame Sub-assembly LH | *2 | Wire |
| *3 | Rear No. 1 Seat Cushion Lock Assembly LH | *4 | Rear No. 1 Seat Lock Control Lever |
| *5 | Rear No. 1 Seat Back Assembly | *6 | Rear No. 1 Seat Leg Sub-assembly LH |