FUNCTION
The Dual VVT-i system is designed to control the intake and exhaust camshafts within a range of 46° (intake) and 40° (exhaust) respectively (of crankshaft angle) to provide valve timing that is optimally suited to engine operating conditions. This improves torque in all speed ranges as well as increasing fuel economy and reducing exhaust emissions.
| *1 | Camshaft Timing Oil Control Valve Assembly (for Intake Side) | *2 | Camshaft Timing Oil Control Valve Assembly (for Exhaust Side) |
| *3 | Crank Position Sensor | *4 | Engine Coolant Temperature Sensor |
| *5 | Throttle Position Sensor | *6 | Intake Air Flow Meter Assembly |
| *7 | ECM | *8 | Cam Position Sensor (for Exhaust Side) |
| *9 | Cam Position Sensor (for Intake Side) | - | - |
The Dual VVT-i system delivers excellent benefits during the vehicle operation states shown in the table below.
| Operation State | Objective | Effect |
|---|---|---|
| During Idle | Eliminating overlap to reduce blow back to the intake side. | ·
Stabilized idle speed ·
Better fuel economy |
| Upon Starting and Stopping the Engine | Eliminating overlap to minimize blow back to the intake side. | Improved startability |
| At Light Load | Eliminating overlap to reduce blow back to the intake side. | Ensured engine stability |
| At Medium Load | Increasing overlap to increase internal EGR to reduce pumping losses. | ·
Better fuel economy ·
Improved emission control |
| In Low to Medium Speed Range with Heavy Load | Advancing the intake valve close timing for volumetric efficiency improvement. | Improved torque in low to medium speed range |
| In High Speed Range with Heavy Load | Retarding the intake valve close timing for volumetric efficiency improvement. | Improved output |
| At Low Temperatures | Eliminating overlap to reduce blow back to the intake side during fast idle. | ·
Stabilized idle speed ·
Better fuel economy |