CONSTRUCTION
Connecting rod sub-assemblies that have been forged for high strength are used for weight reduction.
Nutless-type plastic region tightening bolts are used on the connecting rod sub-assemblies for a lighter design.
The width of the connecting rod bearings has been optimized to reduce friction.
The lining surface of the connecting rod bearing is micro-grooved to provide an optimal oil clearance. As a result, cold-engine cranking performance has been improved and engine vibration has been reduced.
| *1 | Plastic Region Tightening Bolt | *2 | Connecting Rod Sub-assembly |
| *3 | Connecting Rod Bearing | - | - |
| *a | Micro-grooved | - | - |