Home › Engine / Hybrid System › 1NR-VE ENGINE MECHANICAL › ENGINE UNIT › from 2015.08
NM19Y0E _51 Engine / Hybrid System _041613 1NR-VE ENGINE MECHANICAL _0193431 ENGINE UNIT DE DETAILS F

1NR-VE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VALVE MECHANISM  


CONSTRUCTION


a.

Intake and exhaust efficiency has been increased due to larger total port areas.


b.

The valve mechanism uses a No. 1 valve rocker arm sub-assemblies with built-in needle bearings. This reduces the friction that occurs between the cams and the areas on the No. 1 valve rocker arm sub-assemblies that push the valves down, thus improving fuel economy.


c.

Valve lash adjuster assemblies, which maintain a constant zero valve clearance through the use of oil pressure and spring force, are used.


d.

The intake camshaft (camshaft) and exhaust camshaft (No. 2 camshaft) are driven by a chain sub-assembly.


e.

This engine uses a Dual Variable Valve Timing-intelligent (Dual VVT-i) system which controls the intake camshaft (camshaft) and exhaust camshaft (No. 2 camshaft) to provide optimal valve timing according to driving conditions. With this, lower fuel consumption, higher engine performance, and reduced exhaust emissions have been achieved.

W128702C01
0.51,0.677 0.917,0.677 0.917,0.677 1.646,1.344 true 1.198,0.271 1.708,0.271 1.708,0.271 2.208,1.229 true 2.26,1.604 2.604,0.219 2.604,0.219 2.865,0.219 true 3.604,0.958 3.75,0.271 3.75,0.271 3.99,0.271 false 4.302,1.115 4.448,0.427 4.448,0.427 4.688,0.427 false 5.75,1.125 6.021,0.729 6.021,0.729 6.385,0.729 true 5.75,1.813 6.406,2.635 6.406,2.635 6.688,2.635 true 5.156,3.313 5.813,4.135 5.813,4.135 6.094,4.135 true 5.052,4.406 4.594,4.406 4.594,4.406 3.802,2.01 true 2.74,4.396 2.979,4.396 2.979,4.396 3.5,1.969 true 1.021,4.135 1.26,4.135 1.26,4.135 2.292,3.073 true 0.479,3.115 1.021,3.115 1.021,3.115 2.01,2.542 true 0.438,2.219 0.979,2.219 0.979,2.219 1.677,1.875 true 0.323,0.604 0.635,0.802 0.313,0.198 10 false *1 1.021,0.188 1.333,0.385 0.313,0.198 10 false *2 2.906,0.135 3.219,0.333 0.313,0.198 10 false *3 4.042,0.198 4.354,0.396 0.313,0.198 10 false *4 4.729,0.354 5.042,0.552 0.313,0.198 10 false *5 6.448,0.646 6.76,0.844 0.313,0.198 10 false *6 6.729,2.531 7.042,2.729 0.313,0.198 10 false *7 6.146,4.042 6.458,4.24 0.313,0.198 10 false *8 5.115,4.333 5.427,4.531 0.313,0.198 10 false *9 2.469,4.323 2.927,4.521 0.458,0.198 10 false *10 0.771,4.052 1.229,4.25 0.458,0.198 10 false *11 0.219,3.031 0.677,3.229 0.458,0.198 10 false *12 0.177,2.146 0.635,2.344 0.458,0.198 10 false *13
*1 Intake VVT-i Controller (Camshaft Timing Gear Assembly) *2 No. 2 Chain Vibration Damper
*3 Exhaust VVT-i Controller (Camshaft Timing Exhaust Gear Assembly) *4 Intake Camshaft (Camshaft)
*5 Exhaust Camshaft (No. 2 Camshaft) *6 No. 1 Valve Rocker Arm Sub-assembly
*7 Valve Lash Adjuster Assembly *8 Valve
*9 Exhaust Valve *10 Intake Valve
*11 Timing Chain Guide *12 Timing Chain Tension Arm
*13 No. 1 Chain Tensioner Assembly - -



f.

Valve Timing

Intake Camshaft (Camshaft) Open -10° to 36° BTDC
Close 69° to 23° ABDC
Exhaust Camshaft (No. 2 Camshaft) Open 48° to 8° BBDC
Close 7° to 47° ATDC

W128703C01
3.49,0.365 3.802,0.563 0.313,0.198 10 false *c 3.75,0.667 4.063,0.865 0.313,0.198 10 false 7° 3.927,0.781 4.385,0.979 0.458,0.198 10 false 10° 4.844,1.302 5.302,1.5 0.458,0.198 10 false 47° 4.792,3.458 5.25,3.656 0.458,0.198 10 false 48° 4.198,3.677 4.51,3.875 0.313,0.198 10 false *b 3.781,4 4.042,4.229 0.26,0.229 10 false 8° 3.51,4.281 3.823,4.479 0.313,0.198 10 false *d 2.969,3.938 3.427,4.135 0.458,0.198 10 false 23° 1.865,2.948 2.323,3.146 0.458,0.198 10 false 69° 2.438,1.031 2.896,1.229 0.458,0.198 10 false 36° 3.031,0.885 3.344,1.083 0.313,0.198 10 false *a
*a VVT-i Operation Range (Intake) *b VVT-i Operation Range (Exhaust)
*c TDC *d BDC
V100135

Exhaust Valve Opening Angle
V100136

Intake Valve Opening Angle