Home › Engine / Hybrid System › 1NR-VE LUBRICATION › LUBRICATION SYSTEM › from 2015.08
NM19Y0E _51 Engine / Hybrid System _041623 1NR-VE LUBRICATION _0193437 LUBRICATION SYSTEM DE DETAILS F

1NR-VE LUBRICATION  LUBRICATION SYSTEM  DETAILS  OIL NOZZLE  


CONSTRUCTION


a.

No. 1 oil nozzle sub-assemblies, for cooling and lubricating the pistons, are provided in the cylinder block sub-assembly.


b.

The No. 1 oil nozzle sub-assemblies contain a check ball to prevent oil from being fed when the oil pressure is low. This prevents the overall oil pressure in the engine from dropping.

W128693C01
4.083,0.698 6.552,3.063 2.469,2.365 0.594,0.25 0.896,0.25 0.896,0.25 1.292,0.875 true 1.26,3.354 1.563,3.354 1.563,3.354 1.781,2.063 true 5.656,1.958 5.979,2.865 5.979,2.865 6.25,2.865 true 0.396,0.167 0.708,0.365 0.313,0.198 10 false *1 1.094,3.271 1.406,3.469 0.313,0.198 10 false *2 4.188,0.771 4.5,0.969 0.313,0.198 10 false *a 6.302,2.781 6.615,2.979 0.313,0.198 10 false *3
*1 Cylinder Block Sub-assembly *2 No. 1 Oil Nozzle Sub-assembly
*3 Check Ball - -
*a No. 1 Oil Nozzle Sub-assembly Cross Section - -
V100135

Oil - -