OUTLINE
The lubrication circuit is fully pressurized and all oil passes through an oil filter.
The crankshaft drives a trochoid gear type oil pump. The oil pump fits compactly inside the timing chain or belt cover sub-assembly.
The oil strainer sub-assembly is made of plastic to reduce weight.
This engine has an oil return system in which the oil is force-fed to the upper cylinder head sub-assembly and returns to the oil pan sub-assembly through the oil return holes in the cylinder head sub-assembly and cylinder block sub-assembly.
The camshaft timing oil control valve assembly regulates the oil pressure and supplies oil to the VVT-i controllers (camshaft timing gear assembly and camshaft timing exhaust gear assembly).
No. 1 oil nozzle sub-assemblies are utilized for piston cooling and lubrication.
| *1 | Intake VVT-i Controller (Camshaft Timing Gear Assembly) | *2 | Camshaft Timing Oil Control Valve Assembly (for Intake Side) |
| *3 | Exhaust VVT-i Controller (Camshaft Timing Exhaust Gear Assembly) | *4 | Camshaft Timing Oil Control Valve Assembly (for Exhaust Side) |
| *5 | Oil Pump | *6 | Oil Filter |
| *7 | Oil Strainer Sub-assembly | *8 | No. 1 Oil Nozzle Sub-assembly |