CONSTRUCTION
The A4R automatic transmission is used an input speed sensor and an output speed sensor. Thus, the ECM can detect the timing of the shifting of the gears and appropriately control the engine torque and hydraulic pressure in response to the various conditions.
The input speed sensor detects the input speed of the transmission. The front clutch drum is used as the timing rotor for this sensor.
The output speed sensor detects the speed of the output shaft. The parking lock gear is used as the timing rotor for this sensor.
The speed sensor mainly consists of the hall IC and magnet. The hall IC converts the changes in the magnetic flux that are caused by the rotation of the timing rotor into electric signals, and outputs them to the ECM.
| *1 | Parking Lock Gear | *2 | Output Speed Sensor (Transmission Revolution Sensor) |
| *3 | Input Speed Sensor (Transmission Revolution Sensor) | *4 | Front Clutch Drum |