CONSTRUCTION
In order to provided a hydraulic pressure that is proportion to current that flows to the solenoid coil, The shift solenoid valve SL2, SL3 and the shift solenoid valve SL1 linearly controls the line pressure and clutch and brake engagement pressure based on the signals it receives from the ECM.
The Shift Solenoid Valve SL2 and Shift Solenoid Valve SL3 have the same basic structure.
| Solenoid | Action | Function |
|---|---|---|
| SL1 | For brake engagement pressure control | Controls the hydraulic pressure to the B1 brake. |
| SL2 | For clutch engagement pressure control | Controls the hydraulic pressure to the C2 clutch. |
| SL3 | For clutch engagement pressure control | Controls the hydraulic pressure to the C3 clutch |
The lock up control solenoid assembly (SLU) controls the hydraulic pressure to the lock-up clutch by opening and closing the fluid passage in accordance provided by the ECM.
| Solenoid | Action | Function |
|---|---|---|
| SLU | For lock-up clutch pressure control | Controls the hydraulic pressure to the lock-up clutch. |
shift solenoid valve DSL (SL) uses a three-way solenoid valve.
When the shift solenoid valve DSL (SL) is ON, the fluid passage opens in order to apply hydraulic pressure. When it is OFF, the fluid passage closes and releases the applied hydraulic pressure.
shift solenoid valve DSL (SL) have the same basic structure.
| Solenoid | Action | Function |
|---|---|---|
| SL | For fluid passage switching control | Switches the lock up relay valve. |
In order to provide a hydraulic pressure that is proportional to the current that flows to the solenoid coil, the Line Pressure Control Solenoid Assembly (SLT) linearly controls the line pressure based on the signals it receives from the ECM.
| Solenoid | Action | Function |
|---|---|---|
| SLT | For line pressure control | Control the line pressure. |