Home › Drivetrain › CLUTCH › CLUTCH SYSTEM › from 2015.08
NM19Y0E _52 Drivetrain _003190 CLUTCH _0016017 CLUTCH SYSTEM GE GENERAL F

CLUTCH  CLUTCH SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A dry type single plate clutch which is operated by cable is used on the 1NR-VE engine models.


b.

A dry type single plate clutch which is operated by hydraulic pressure is used on the 2NR-VE engine models.

X106704C03
0.49,0.167 3.333,3.583 2.844,3.417 3.75,0.167 6.563,3.583 2.813,3.417 0.563,0.271 0.885,0.49 0.323,0.219 10 false *A 3.854,0.292 4.25,0.5 0.396,0.208 10 false *B
*A Models with 1NR-VE Engine *B Models with 2NR-VE Engine




SPECIFICATION


Engine Type 1NR-VE 2NR-VE
Transmission Type M5S
Clutch Type Dry Type
Single Plate Clutch
Diaphragm Spring
←
Operation Mechanical (Cable) Hydraulic
Clutch Cover Type DST*1 ←
Size 190 mm (7.5 in.) 200 mm (7.9 in.)
Installed Load 3550 N 3920 N
Clutch Disc Facing Size*2 190 mm x 132 mm x 3.5 mm (7.5 in. x 5.2 in. x 0.14 in.) 200 mm x 140 mm x 3.5 mm (7.9 in. x 5.5 in. x 0.14 in.)
Master Cylinder Type - Plunger
Cylinder Diameter - 15.87 mm (0.62 in.)
Release Cylinder Type - Non-adjustable
Cylinder Diameter - 20.64 mm (0.81 in.)

HINT:

*1:DST (Diaphragm Spring Turnover)

*2:Outer diameter x Inner diameter x Thickness