Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM › 2015.08–2016.09
NM19Y0E _54 Brake _003197 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0016025 BRAKE CONTROL SYSTEM DE DETAILS F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  DETAILS  BRAKE ACTUATOR  


CONSTRUCTION


a.

The brake actuator assembly consists of the actuator portion and skid control ECU.

X128390C01
4.094,1.396 4.719,1.396 true 1.5,2.146 2.125,2.146 true 4.76,1.323 5.073,1.563 0.313,0.24 10 false *1 1.333,2.063 1.646,2.302 0.313,0.24 10 false *2
*1 Skid Control ECU *2 Actuator Portion



b.

The actuator portion consists of 4 pressure holding solenoid valves, 4 pressure reduction solenoid valves, 2 pumps, and 2 reservoirs.

X129998C02
2.208,0.49 2.531,0.76 0.323,0.271 10 false *a 4.719,0.479 5.042,0.75 0.323,0.271 10 false *a 1.344,2.375 1.667,2.646 0.323,0.271 10 false *1 2.948,3 3.271,3.271 0.323,0.271 10 false *3 3.156,4.708 3.479,4.979 0.323,0.271 10 false *4 2.438,3.885 2.76,4.156 0.323,0.271 10 false *2 0.823,6.323 1.146,6.594 0.323,0.271 10 false *5 2.479,6.323 2.802,6.594 0.323,0.271 10 false *6 4.5,6.323 4.823,6.594 0.323,0.271 10 false *7 6.073,6.313 6.396,6.583 0.323,0.271 10 false *8 2.448,2.365 2.771,2.635 0.323,0.271 10 false *1 4.427,2.354 4.75,2.625 0.323,0.271 10 false *1 5.521,2.344 5.844,2.615 0.323,0.271 10 false *1 1.333,3.896 1.656,4.167 0.323,0.271 10 false *2 4.448,3.896 4.771,4.167 0.323,0.271 10 false *2 5.542,3.896 5.865,4.167 0.323,0.271 10 false *2 4,3.01 4.323,3.281 0.323,0.271 10 false *3 3.74,4.708 4.063,4.979 0.323,0.271 10 false *4
*1 Pressure Holding Solenoid Valve *2 Pressure Reduction Solenoid Valve
*3 Pump *4 Reservoir
*5 Front Wheel Cylinder LH *6 Rear Wheel Cylinder RH
*7 Rear Wheel Cylinder LH *8 Front Wheel Cylinder RH
*a From Master Cylinder - -




OPERATION


a.

ABS and EBD

i.

Based on the signals received from the 4 speed sensors, the skid control ECU calculates the speed of each wheel, and checks wheel slipping conditions. In accordance with the slipping condition, the skid control ECU controls each solenoid valve in the brake actuator assembly in order to adjust the fluid pressure of each wheel cylinder in the following 3 modes: pressure increase, pressure holding, and pressure reduction modes.

X103870C02
2.677,0.646 2.813,0.646 2.813,0.646 3.594,0.938 true 2.719,2.781 2.854,2.781 2.854,2.781 3.594,2.49 true 6.323,3.375 6.906,3.802 0.583,0.427 10 *e 5.781,0.156 6.583,0.854 0.802,0.698 10 *c 3.5,0.156 4.448,0.896 0.948,0.74 10 *b 2.573,2.719 3.156,3.313 0.583,0.594 10 *4 1.229,3.24 1.948,3.802 0.719,0.563 10 *2 1.229,1.656 1.99,2.229 0.76,0.573 10 *1 2.479,0.573 3.083,1.115 0.604,0.542 10 *3 1.24,0.156 1.938,0.76 0.698,0.604 10 *a 1.792,3.396 2.448,3.802 0.656,0.406 10 *d
*1 Pressure Holding Solenoid Valve *2 Pressure Reduction Solenoid Valve
*3 Port A *4 Port B
*a Pressure Increase Mode *b Pressure Holding Mode
*c Pressure Reduction Mode *d To Wheel Cylinder
*e From Wheel Cylinder - -


Brake Actuator Operation in ABS and EBD
Pressure Mode Increase Mode Holding Mode Reduction Mode
Pressure Holding Solenoid Valve (Port A) Off (Open) On (Closed) ←
Pressure Reduction Solenoid Valve (Port B) Off (Closed) ← On (Open)
Wheel Cylinder Pressure Increases Holds Reduces