Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM › from 2015.08
NM19Y0E _55 Steering _003202 POWER ASSIST SYSTEMS _0016030 POWER STEERING SYSTEM DE DETAILS F

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  DETAILS  POWER STEERING MOTOR  


CONSTRUCTION


a.

A low-inertia, low-noise, high power output DC motor is used.


b.

The operating range of the power steering motor is 8 to 16 V.


c.

The power steering motor consists of the rotor, stator and motor shaft.


d.

The torque generated by the power steering motor is transmitted via the joint to the worm gear. This torque is then transmitted via the wheel gear to the column shaft.

X128395C01
4.146,1.031 4.51,0.448 4.51,0.448 4.906,0.448 true 2.333,1.313 1.813,0.927 1.813,0.927 1.375,0.927 true 3.104,1.365 2.542,0.406 2.542,0.406 2.25,0.406 true 2.229,2.042 1.396,2.667 1.396,2.667 1.031,2.667 true 2.49,1.958 3.385,2.969 3.385,2.969 3.865,2.969 true 1.219,0.854 1.563,1.115 0.344,0.26 10 false *1 2.083,0.333 2.427,0.594 0.344,0.26 10 false *4 4.958,0.385 5.302,0.646 0.344,0.26 10 false *5 3.906,2.906 4.25,3.167 0.344,0.26 10 false *3 0.854,2.594 1.198,2.854 0.344,0.26 10 false *2
*1 Worm Gear *2 Wheel Gear
*3 Column Shaft *4 Motor Shaft
*5 Power Steering Motor - -