Home › Engine / Hybrid System › 2NR-VE ENGINE CONTROL › SFI SYSTEM › from 2015.08
NM19Y0E _51 Engine / Hybrid System _041612 2NR-VE ENGINE CONTROL _0198970 SFI SYSTEM CO CONTROL F

2NR-VE ENGINE CONTROL  SFI SYSTEM  CONTROL  DUAL VVT-i CONTROL  


FUNCTION


a.

The Dual VVT-i system is designed to control the intake and exhaust camshafts within a range of 46° (intake) and 40° (exhaust) respectively (of crankshaft angle) to provide valve timing that is optimally suited to engine operating conditions. This improves torque in all speed ranges as well as increasing fuel economy and reducing exhaust emissions.

W128678C01
0.281,0.552 0.781,0.552 0.781,0.552 1.344,1.042 true 0.344,1.76 0.844,1.76 0.844,1.76 1.771,1.333 true 0.573,3.552 1.552,3.552 true 4.021,1.979 4.177,2.583 4.177,2.583 4.427,2.583 true 4.063,1.094 4.469,0.479 4.469,0.479 5.031,0.479 true 3.656,0.875 3.938,0.167 3.938,0.167 4.24,0.167 true 0.104,0.479 0.417,0.677 0.313,0.198 10 false *1 0.156,1.677 0.469,1.875 0.313,0.198 10 false *2 0.375,3.479 0.688,3.677 0.313,0.198 10 false *3 4.469,2.5 4.781,2.698 0.313,0.198 10 false *4 5.302,3.677 5.615,3.875 0.313,0.198 10 false *5 5.698,3.677 6.01,3.875 0.313,0.198 10 false *6 5.302,1.854 5.615,2.052 0.313,0.198 10 false *7 5.094,0.375 5.406,0.573 0.313,0.198 10 false *8 4.271,0.083 4.583,0.281 0.313,0.198 10 false *9
*1 Camshaft Timing Oil Control Valve Assembly (for Intake Side) *2 Camshaft Timing Oil Control Valve Assembly (for Exhaust Side)
*3 Crank Position Sensor *4 Engine Coolant Temperature Sensor
*5 Throttle Position Sensor *6 Intake Air Flow Meter Assembly
*7 ECM *8 Cam Position Sensor (for Exhaust Side)
*9 Cam Position Sensor (for Intake Side) - -



b.

The Dual VVT-i system delivers excellent benefits during the vehicle operation states shown in the table below.

W111423E01
1.552,0.771 2.01,0.969 0.458,0.198 10 TDC 0.938,1.51 1.25,1.708 0.313,0.198 10 EX 2.021,0.896 3.083,1.156 1.063,0.26 10 Most Retarded 2.26,1.542 2.573,1.74 0.313,0.198 10 IN 1.51,2.271 1.969,2.469 0.458,0.198 10 BDC 0.76,2.521 2.448,2.719 1.688,0.198 10 - During Idle 1.479,3.365 1.938,3.563 0.458,0.198 10 TDC 1.49,4.979 1.948,5.177 0.458,0.198 10 BDC 1.469,7.667 1.927,7.865 0.458,0.198 10 BDC 4.802,2.26 5.26,2.458 0.458,0.198 10 BDC 4.771,5.083 5.229,5.281 0.458,0.198 10 BDC 4.792,7.667 5.25,7.865 0.458,0.198 10 BDC 1.51,6.167 1.969,6.365 0.458,0.198 10 TDC 4.802,6.167 5.26,6.365 0.458,0.198 10 TDC 4.802,3.49 5.26,3.688 0.458,0.198 10 TDC 4.781,0.688 5.24,0.885 0.458,0.198 10 TDC 4.49,2.604 6.479,2.802 1.99,0.198 10 At Light Load 4.417,0.417 5.625,0.667 1.208,0.25 10 To Retarded Side 1.104,5.448 2.24,5.677 1.135,0.229 10 At Medium Load 0.281,3.51 2.729,3.708 2.448,0.198 10 To Advanced Side 3.49,5.458 6.552,5.677 3.063,0.219 10 In Low to Medium Speed Range with Heavy Load 5.219,4.802 6.448,5.021 1.229,0.219 10 To Advanced Side 0.833,4.271 1.146,4.469 0.313,0.198 10 EX 0.896,6.958 1.208,7.156 0.313,0.198 10 EX 4.146,6.938 4.458,7.135 0.313,0.198 10 EX 4.188,4.24 4.5,4.438 0.313,0.198 10 EX 4.188,1.542 4.5,1.74 0.313,0.198 10 EX 2.26,4.26 2.573,4.458 0.313,0.198 10 IN 2.26,6.958 2.573,7.156 0.313,0.198 10 IN 5.583,6.99 5.896,7.188 0.313,0.198 10 IN 5.573,4.25 5.885,4.448 0.313,0.198 10 IN 5.573,1.563 5.885,1.76 0.313,0.198 10 IN 0.292,8.01 2.698,8.281 2.406,0.271 10 In High Speed Range with Heavy Load 0.281,7.521 2.729,7.719 2.448,0.198 10 To Retarded Side 4.271,8.042 5.917,8.26 1.646,0.219 10 At Low Temperatures 0.76,2.802 3.365,3.083 2.604,0.281 10 - Upon Starting and Stopping the Engine

Operation State Objective Effect
During Idle Eliminating overlap to reduce blow back to the intake side.
·

Stabilized idle speed

·

Better fuel economy


Upon Starting and Stopping the Engine Eliminating overlap to minimize blow back to the intake side. Improved startability
At Light Load Eliminating overlap to reduce blow back to the intake side. Ensured engine stability
At Medium Load Increasing overlap to increase internal EGR to reduce pumping losses.
·

Better fuel economy

·

Improved emission control


In Low to Medium Speed Range with Heavy Load Advancing the intake valve close timing for volumetric efficiency improvement. Improved torque in low to medium speed range
In High Speed Range with Heavy Load Retarding the intake valve close timing for volumetric efficiency improvement. Improved output
At Low Temperatures Eliminating overlap to reduce blow back to the intake side during fast idle.
·

Stabilized idle speed

·

Better fuel economy