FUNCTION
The ETCS-i is used, providing excellent throttle control in all operating ranges. The accelerator cable has been discontinued, and an accelerator pedal position sensor has been provided on the accelerator pedal sensor assembly.
In a conventional throttle body assembly, the throttle valve opening is determined invariably by the amount of accelerator pedal effort. In contrast, the ETCS-i uses the ECM to calculate the optimal throttle valve opening that is appropriate for the respective driving conditions and uses a throttle control motor to control the opening.
The ETCS-i controls the Idle Speed Control (ISC) system.
In case of an abnormal condition, this system switches to the limp mode.