Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM › from 2015.08
NM19Y0E _58 Vehicle Interior _003208 DOOR LOCK _0016037 POWER DOOR LOCK CONTROL SYSTEM CO CONTROL F

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  CONTROL  DOOR LOCK CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the power door lock control system have the following functions:

Component Function
Main Body ECU (Fuse Block Assembly) Drives all door lock motors in response to signals.
Door Lock Assembly Door Lock Motor Drives the motor in response to signals from the main body ECU (fuse block assembly) and locks or unlocks the doors.
Door Lock Switch Sends a lock or unlock request signal to the main body ECU (fuse block assembly) by operation of the door key cylinder or the door lock knob.
Door Courtesy Light Switch Assembly Detects whether the doors are open or closed and sends this information to the main body ECU (fuse block assembly).
Steering column upper with switch bracket assembly (unlock warning switch) Detects if the key is inserted in the ignition key cylinder or not.



FUNCTION


a.

The power door lock control system has the following functions:

Function Outline
Manual Lock and Unlock This function can lock or unlock all doors by operation of the driver door lock knob.
Key-linked Lock and Unlock This function, linked with the driver door key cylinder, can lock or unlock all the doors when a lock or unlock operation is effected.
Key Confinement Prevention* When the key is inserted in the ignition key cylinder with the driver's door open and if you perform the door lock operation, all the doors will be unlocked.

HINT:

*: Models with wireless door lock control system