FUNCTION OF MAIN COMPONENTS
The main components of the wireless door lock control system have the following functions:
| Component | Function | |
|---|---|---|
| Main Body ECU (Fuse Block Assembly) | ·
Drives all door lock motors in response to signals. ·
Receives a lock or unlock signal from the door control transmitter sub-assembly. |
|
| Door Lock Assembly | Door Lock Motor | Drives the motor in response to signals from the main body ECU (fuse block assembly) and locks or unlocks the doors. |
| Door Lock Switch | Sends a lock or unlock request signal to the main body ECU (fuse block assembly) by operation of the door key cylinder or the door lock knob. | |
| Door Courtesy Light Switch Assembly | Detects whether the doors are open or closed and sends this information to the main body ECU (fuse block assembly). | |
| Steering column upper with switch bracket assembly (unlock warning switch) | Detects if the key is inserted in the ignition key cylinder or not. | |
FUNCTION
The wireless door lock control system has the following functions:
| Function | Outline |
|---|---|
| All Doors Lock | Pressing the lock button of the door control transmitter sub-assembly locks all doors. |
| All Doors Unlock | Pressing the unlock button of the door control transmitter sub-assembly unlocks all doors. |
| Repeat | ·
If a door is not locked in response to the locking operation of the door control transmitter sub-assembly, the main body ECU (fuse block assembly) will output a lock signal again after 1 second passes. ·
If a door is not unlocked in response to the unlocking operation of the door control transmitter sub-assembly, the main body ECU (fuse block assembly) will output a unlock signal again after 1 second passes. |
| Automatic Relock | If none of the doors and hood is opened for 40 seconds after being unlocked by the wireless door lock control, all the doors are locked again automatically.*1 |
| If none of the doors is opened for 30 seconds after being unlocked by the wireless door lock control, all the doors are locked again automatically.*2 | |
| Answer Back | When the doors are being locked or unlocked using the door control transmitter sub-assembly, the hazard warning lights blink once while locking and twice while unlocking. |
| Security | The door control transmitter sub-assembly sends door lock/unlock operation request signals as a rolling code. |
*1: Models with theft warning ECU assembly
*2: Models without theft warning ECU assembly