CONSTRUCTION
Beads have been set into the roof panel and roof reinforcements have been arrayed optimally to reduce weight and achieve maximum tensile rigidity.
| *1 | Roof Panel | *2 | Roof Panel Reinforcement No. 1 |
| *3 | Roof Panel Reinforcement No. 2 | *4 | Roof Panel Reinforcement No. 4 |
| *5 | Roof Panel Reinforcement No. 8 | - | - |
| *a | Bead | - | - |
Improved binding strength on both the left and right pillars and the straight cowl edge lines offer excellent stability and controllability.
| *1 | Cowl Top Panel Inner | - | - |
Vertical reinforcement (back door opening lower reinforcement) has been applied to the back door opening to expand the cross section of the area that closes. This improves the rigidity of the back door opening, and offers superior stability.
| *1 | Roof Side Panel Inner | *2 | Back Door Opening Lower Reinforcement |
| *3 | Quarter Panel Extension Outer | *4 | Side Panel Outer |
| *a | A - A Cross Section | *b | Back Door Opening Section |
| *c | Closed Cross Section | - | - |
The position of the body's structural parts is optimized, ensuring driving stability and riding comfort.
| *1 | Front Floor Cross Member Reinforce Sub-assembly | *2 | Rear Floor Cross Member Gusset |
| *1 | Front Outrigger No. 2 | *2 | Front Outrigger No. 3 |
| *3 | Outrigger No. 3 | - | - |