Home › Engine / Hybrid System › 2NR-VE ENGINE MECHANICAL › ENGINE UNIT › from 2015.08
NM19Y0E _51 Engine / Hybrid System _041614 2NR-VE ENGINE MECHANICAL _0199634 ENGINE UNIT DE DETAILS F

2NR-VE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CONNECTING ROD AND CONNECTING ROD BEARING  


CONSTRUCTION


a.

Connecting rod sub-assemblies that have been forged for high strength are used for weight reduction.


b.

Nutless-type plastic region tightening bolts are used on the connecting rod sub-assemblies for a lighter design.


c.

The width of the connecting rod bearings has been optimized to reduce friction.


d.

The lining surface of the connecting rod bearing is micro-grooved to provide an optimal oil clearance. As a result, cold-engine cranking performance has been improved and engine vibration has been reduced.

W100982C01
4.521,0.906 4.708,0.521 4.708,0.521 4.823,0.521 true 1.844,2.406 1.354,1.906 1.354,1.906 1.24,1.906 true 2.208,1.854 2.698,1.344 2.698,1.344 2.813,1.344 true 5.208,2.5 4.708,3 4.708,3 4.604,3 true 4.854,0.438 5.094,0.688 0.24,0.25 10 *a 2.844,1.281 3.083,1.531 0.24,0.25 10 *2 1.063,1.823 1.302,2.073 0.24,0.25 10 *1 4.417,2.927 4.604,3.177 0.188,0.25 10 *3
*1 Plastic Region Tightening Bolt *2 Connecting Rod Sub-assembly
*3 Connecting Rod Bearing - -
*a Micro-grooved - -