Home › Engine / Hybrid System › 2NR-VE ENGINE MECHANICAL › ENGINE UNIT › from 2015.08
NM19Y0E _51 Engine / Hybrid System _041614 2NR-VE ENGINE MECHANICAL _0199634 ENGINE UNIT DE DETAILS F

2NR-VE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VALVE LASH ADJUSTER  


CONSTRUCTION


a.

A valve lash adjuster assembly is located at the fulcrum of each No. 1 valve rocker arm sub-assembly. A valve lash adjuster assembly consists primarily of a plunger, a plunger spring, a check ball, and a check ball spring.


b.

The valve lash adjuster assembly is actuated by the engine oil, plunger spring, and check ball spring. The oil pressure and the spring force that act on the plunger push the No. 1 valve rocker arm sub-assembly against the cam, in order to adjust the valve clearance. This reduces the engine noise that is created during the opening and closing of the valve.

W101941C04
4.896,1.729 5.521,0.781 5.521,0.781 5.615,0.781 true 4.708,1.302 4.458,0.469 4.458,0.469 4.365,0.469 true 1.979,1.188 2.188,0.563 2.188,0.563 2.292,0.563 true 2.125,2.031 2.448,1.469 2.448,1.469 2.573,1.469 true 1.844,2.635 1.344,2.094 1.344,2.094 1.26,2.094 true 1.719,2.823 1.302,3.115 1.302,3.115 1.229,3.115 true 1.906,2.74 2.354,3.156 2.354,3.156 2.417,3.156 true 4.646,2.146 4.021,2.917 4.021,2.917 3.844,2.917 true 5.677,0.708 5.896,0.906 0.219,0.198 10 false *8 4.188,0.385 4.406,0.583 0.219,0.198 10 false *7 2.333,0.5 2.552,0.698 0.219,0.198 10 false *1 2.615,1.396 2.833,1.594 0.219,0.198 10 false *5 2.469,3.094 2.688,3.313 0.219,0.219 10 false *4 3.656,2.833 3.875,3.031 0.219,0.198 10 false *6 1.063,3.031 1.281,3.229 0.219,0.198 10 false *3 1.094,2.021 1.313,2.219 0.219,0.198 10 false *2
*1 Plunger *2 Check Ball
*3 Plunger Spring *4 Check Ball Spring
*5 Oil Passage *6 Valve Lash Adjuster Assembly
*7 Cam *8 No. 1 Valve Rocker Arm Sub-assembly


HINT:

Valve clearance adjustment is not necessary because valve lash adjuster assemblies are used.