Home › Engine / Hybrid System › 2NR-VE ENGINE MECHANICAL › ENGINE UNIT › from 2015.08
NM19Y0E _51 Engine / Hybrid System _041614 2NR-VE ENGINE MECHANICAL _0199634 ENGINE UNIT DE DETAILS F

2NR-VE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  TIMING CHAIN AND CHAIN TENSIONER  


CONSTRUCTION


a.

A chain sub-assembly with an 8 mm (0.315 in.) pitch is used to make the engine more compact.


b.

The No. 1 chain tensioner assembly uses a spring and oil pressure to maintain proper chain tension at all times.


c.

The No. 1 chain tensioner assembly suppresses noise generated by the chain sub-assembly.


d.

The No. 1 chain tensioner assembly is a ratchet type tensioner with a non-return mechanism.

W128704C01
2.823,0.156 3.115,0.156 3.115,0.156 3.479,0.417 true 1.625,0.729 1.917,0.729 1.917,0.729 2.854,1.208 true 1.417,3.125 2,3.125 2,3.125 3.354,2.354 true 3.531,2.708 4.708,2.333 4.708,2.333 5.365,2.333 true 3.771,1.844 4.865,1.323 4.865,1.323 5.521,1.323 true 4.073,0.896 4.958,0.448 4.958,0.448 5.333,0.448 true 2.635,0.083 2.948,0.281 0.313,0.198 10 false *1 1.438,0.656 1.75,0.854 0.313,0.198 10 false *2 1.198,3.063 1.51,3.26 0.313,0.198 10 false *3 5.427,2.26 5.74,2.458 0.313,0.198 10 false *4 5.563,1.219 5.875,1.417 0.313,0.198 10 false *5 5.375,0.354 5.688,0.552 0.313,0.198 10 false *6
*1 No. 2 Chain Vibration Damper *2 No. 1 Chain Tensioner Assembly
*3 Timing Chain Tension Arm *4 Crankshaft Timing Sprocket
*5 Timing Chain Guide *6 Chain Sub-assembly