CONSTRUCTION
Lightweight aluminum alloy has been used for the oil pan sub-assembly. Additionally, integration with the stiffening crankcase has resulted in a highly rigid crankcase, ensuring a rigid join with the power plant.
The rear oil seal retainer, rear end bracket, and oil filter bracket have been unified with the oil pan sub-assembly, and the oil strainer installed inside the oil pan sub-assembly, making the assembly more compact and reducing its weight.
| *1 | Oil Pan Sub-assembly | - | - |
| *a | Oil Filter Bracket | *b | Rear End Bracket |
| *c | Rear Oil Seal Retainer | - | - |
An No. 1 oil pan baffle plate has been installed inside the oil pan sub-assembly. Oil mist is collected on the No. 1 oil pan baffle plate and condensed into oil droplet. The No. 1 oil pan baffle plate is inclined rearwards, and the oil droplet flows through the rear of the oil pan sub-assembly. Utilizing a passage that sucks the oil through the oil strainer sub-assembly at the front of the oil pan sub-assembly allows gas-liquid separation of the engine oil to occur in the lengthened passage.
| *1 | Oil Pan Sub-assembly | *2 | No. 1 Oil Pan Baffle Plate |
| *3 | Oil Strainer Sub-assembly | - | - |
|
Oil Flow |
|
To Oil Pump |