Home › Engine / Hybrid System › 2NR-VE ENGINE MECHANICAL › ENGINE UNIT › from 2015.08
NM19Y0E _51 Engine / Hybrid System _041614 2NR-VE ENGINE MECHANICAL _0199634 ENGINE UNIT DE DETAILS F

2NR-VE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  PISTON  


CONSTRUCTION


a.

The pistons are made of aluminum alloy to allow them to be compact and lightweight.


b.

The piston head portion uses a taper squish shape to achieve fuel combustion efficiency.


c.

Semi floating type piston pins are used.


d.

Low-tension piston rings are used to reduce friction and achieve excellent fuel economy.


e.

Narrow-width piston rings are used to reduce weight and friction.


f.

A No. 1 compression ring with an inside bevel shape is used to reduce blow-by gas.


g.

A Physical Vapor Deposition (PVD) coating has been applied to the surface of the No. 1 compression ring and oil ring, in order to improve wear resistance.


h.

The piston skirt is coated with resin to reduce friction losses.

W113483C02
2.01,1.865 2.375,2.385 2.375,2.385 2.052,2.385 true 2.969,0.938 2.969,0.25 2.969,0.25 2.729,0.25 true 4.208,0.938 4.208,0.25 4.208,0.25 4.51,0.25 true 5.979,0.76 6.188,0.469 6.188,0.469 6.458,0.469 true 5.979,1.688 6.417,1.688 true 5.99,1.958 6.427,1.958 true 6.021,0.771 6.333,0.969 0.313,0.198 10 false *1 6.083,1.219 6.396,1.417 0.313,0.198 10 false *2 6.052,1.75 6.365,1.948 0.313,0.198 10 false *3 1.896,2.302 2.208,2.5 0.313,0.198 10 false *a 2.563,0.167 2.875,0.365 0.313,0.198 10 false *b 4.563,0.188 4.875,0.385 0.313,0.198 10 false *b 6.5,0.375 6.813,0.573 0.313,0.198 10 false *c 6.448,1.604 6.76,1.802 0.313,0.198 10 false *c 6.458,1.875 6.771,2.073 0.313,0.198 10 false *c
*1 No. 1 Compression Ring *2 No. 2 Compression Ring
*3 Oil Ring - -
*a Resin Coating *b Taper Squish Shape
*c PVD Coating - -