Home › Engine / Hybrid System › 2NR-VE FUEL › FUEL SYSTEM › from 2015.08
NM19Y0E _51 Engine / Hybrid System _041616 2NR-VE FUEL _0212403 FUEL SYSTEM DE DETAILS F

2NR-VE FUEL  FUEL SYSTEM  DETAILS  FUEL TANK  


CONSTRUCTION


a.

Terne-coated carbon steel sheeting was used for the construction of the fuel tank, which has a 45 liter (47.6 US qts, 39.6 Imp. qts) capacity. Additionally, super tin-zinc was used for the construction of fuel tanks for vehicles for Thailand to allow them to use E10 gasoline, which contains 10% ethanol.


b.

The fuel inlet installation section is provided at the rear/upper section of the fuel tank.


c.

To prevent fuel from flowing out, a fuel cut off valve assembly is provided at the top of the fuel tank and a fuel tank filler check valve sub-assembly is provided inside the fuel inlet.

W128816C01
4.813,1.5 5.458,0.667 5.458,0.667 6,0.667 true 0.667,1.688 1.156,1.688 1.156,1.688 2.156,2.344 true 3.625,1.938 5.667,2.344 5.667,2.344 6.042,2.344 true 0.448,1.604 0.76,1.802 0.313,0.198 10 false *1 6.052,0.583 6.365,0.781 0.313,0.198 10 false *3 1.135,0.26 1.448,0.458 0.313,0.198 10 false *2 6.104,2.26 6.417,2.458 0.313,0.198 10 false *4 4.813,2.969 5.125,3.167 0.313,0.198 10 false *5
*1 Fuel Tank Assembly *2 Fuel Tank Filler Check Valve Sub-assembly
*3 Fuel Inlet Pipe *4 Fuel Suction Tube with Pump and Gauge Assembly
*5 Fuel Cut Off Valve Assembly - -