Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM › from 2016.09
NM19Y0E _54 Brake _003197 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0016025 BRAKE CONTROL SYSTEM GE GENERAL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The following brake control functions are provided: Anti-lock Brake System (ABS), Electronic Brake force Distribution (EBD), brake assist, Traction Control (TRC) and Vehicle Stability Control (VSC).*1


b.

The following brake control functions are provided on the models with brake control system: AntilockBrake System (ABS), Electronic Brake force Distribution (EBD).*2


c.

A brake actuator assembly, which has an integrated brake actuator and skid control ECU, is used.


d.

A VSC OFF switch is used.*1

HINT:

*1: Models with VSC

*2: Models without VSC




PRECAUTION


a.

When a brake control system is activated, the brake pedal may shudder. This is a normal occurrence of the system in operation and should not be considered a malfunction.


b.

The TRC and VSC functions control brake hydraulic pressure and engine output to ensure vehicle stability. Therefore, operate the VSC OFF switch (to stop the operation of the TRC and VSC functions) only when it is necessary.*

HINT:

*: Models with VSC