FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
| Speed Sensor | Detects the wheel speed of each of the 4 wheels. | |
| Switch Base* | Steering Sensor | Detects the direction and angle of the steering wheel. |
| Stop Light Switch Assembly | Detects the brake pedal depression signal. | |
| Brake Master Cylinder Reservoir Sub-assembly | Brake Fluid Level Warning Switch | Detects the brake fluid level. |
| Brake Warning Test Switch Assembly | Detects the parking brake lever status. | |
| VSC OFF Switch* | Enables the driver to select normal mode, TRC OFF mode or VSC OFF mode. | |
| Brake Actuator Assembly | Solenoid Valves | Change the fluid path based on the signals from the skid control ECU during the operation of the brake control system functions in order to control the fluid pressure applied to the wheel cylinders. |
| Pump Motor | Drives the pumps inside the brake actuator. | |
| Master Cylinder Pressure Sensor* | Detects the master cylinder pressure. | |
| Solenoid Relay (Built into Skid Control ECU) | Supplies power to the solenoid valves. | |
| Motor Relay (Built into Skid Control ECU) | Supplies power to the pump motor. | |
| Motor Cut Relay (Built into Skid Control ECU) | Cuts the power to the pump motor when the motor relay malfunctions. | |
| Skid Control ECU | ·
Judges the vehicle driving condition based on the signals from each ECU, sensor and switch, and sends the brake control signals to the brake actuator. ·
Detects the vehicle's yaw rate.* ·
Detects the vehicle's acceleration in the forward, rearward, and lateral directions.* |
|
| ECM | ·
Outputs signals such as the shift position signal, Sport mode signal, throttle position signal and engine speed signal to the skid control ECU. ·
Controls the engine output based on the signals from the skid control ECU. |
|
| Power Steering ECU Assembly | Controls the steering assist torque based on the signals received from the skid control ECU. | |
| Combination Meter Assembly | Multi-information Display | Displays the warning message when the skid control ECU detects a malfunction in the system. |
| Brake Warning Light | ·
Illuminates to alert the driver that the skid control ECU detects the malfunction in the apportioning of the brake force. ·
Illuminates to inform the driver when the brake fluid is low. |
|
| ABS Warning Light | Illuminates to alert the driver when the skid control ECU detects a malfunction in the ABS, EBD or brake assist. | |
| Slip Indicator Light* | ·
Blinks to inform the driver when the TRC or VSC is operational. ·
Illuminates to alert the driver when the skid control ECU detects a malfunction in the TRC or VSC. |
|
| TRC OFF Indicator Light* | Illuminates to inform the driver when the TRC OFF mode is selected. | |
| VSC OFF Indicator Light* | Illuminates to inform the driver when the VSC OFF mode is selected. | |
| Parking Brake Indicator Light | Illuminates the alert the driver when the parking brake is applied. | |
| Buzzer | Sounds together with a message display on the multi-information display during a system malfunction. | |
*: Models with VSC
SYSTEM CONTROL
The brake control system (ABS, EBD, brake assist, TRC and VSC) has the following controls:
| Control | Outline |
|---|---|
| Anti-lock Brake System (ABS) | The ABS helps prevent the wheels from locking when the brakes are applied firmly or when braking on a slippery surface. |
| Electronic Brake Force Distribution (EBD) | The EBD control utilizes the ABS, achieving proper brake force distribution between the front and rear wheels in accordance with the driving conditions. In addition, during braking while cornering, the EBD also controls the brake forces of the right and left wheels, helping maintain vehicle behavior. |
| Brake Assist* | The primary purpose of brake assist is to provide an auxiliary brake force to assist a driver who cannot generate a large brake force during emergency braking, helping ensure the vehicle's braking performance. |
| Traction Control (TRC)* | The TRC helps restrain the slippage of the drive wheels if the driver depresses the accelerator pedal excessively when starting off or while accelerating on a slippery surface. |
| Vehicle Stability Control (VSC)* | The VSC helps restrain sideways slippage of the vehicle during a strong front wheel skid or strong rear wheel skid, which may occur while cornering. |
*: Models with VSC
FAIL-SAFE
If a failure occurs in the skid control ECU, sensors or brake actuator assembly, the system continues effecting brake control by excluding the failed area and using only the areas that are operating normally.
DIAGNOSIS
If the skid control ECU detects a malfunction in the brake control system, the warning lights or indicator light illuminate. At the same time, a Diagnostic Trouble Code (DTC) is stored in the memory of the skid control ECU.
This system has a sensor signal check (test mode) function.
For details of DTCs and check function, refer to the Repair Manual.