Home › Engine / Hybrid System › K3-VE ENGINE CONTROL › CAMSHAFT POSITION SENSOR › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002967 K3-VE ENGINE CONTROL _0014962 CAMSHAFT POSITION SENSOR A

K3-VE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11101E 1.INSTALL CAMSHAFT POSITION SENSOR

a.
A126603C06
1.781,1.354 1.906,1.552 false 1.896,1.573 2.375,1.948 0.479,0.375 10 *1
*1 O-ring


Apply a light coat of engine oil to the O-ring.


b.

Install the camshaft position sensor with the bolt.

Torque:
7.5 N*m (77 kgf*cm, 66 in.*lbf)

NOTICE:

Do not twist the O-ring.



c.

Connect the camshaft position sensor connector.


Hide 4.INSPECT FOR ENGINE OIL LEAK