89422A
1.INSPECT ENGINE COOLANT TEMPERATURE SENSOR
| *a | Component without harness connected
(Engine Coolant Temperature Sensor) |
| *b | kΩ |
| *c | °C (°F) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | 20°C (68°F) | 2.29 to 2.60 kΩ |
| 80°C (176°F) | 0.302 to 0.327 kΩ |
In case of checking the engine coolant temperature sensor in water, do not allow water to contact the terminals. After checking, dry the engine coolant temperature sensor.
If the result is not as specified, replace the engine coolant temperature sensor.