Home › Engine / Hybrid System › K3-VE ENGINE CONTROL › INTAKE AIR TEMPERATURE SENSOR › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002967 K3-VE ENGINE CONTROL _0014965 INTAKE AIR TEMPERATURE SENSOR G

K3-VE ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 89424B 1.INSPECT INTAKE AIR TEMPERATURE SENSOR

a.
A126616C03
0.563,3.906 1.042,4.26 0.479,0.354 10 0.2 0.563,3.51 0.969,3.875 0.406,0.365 10 0.5 0.708,3.198 1.031,3.573 0.323,0.375 10 1 0.698,2.49 0.958,2.813 0.26,0.323 10 5 0.604,2.188 1.073,2.594 0.469,0.406 10 10 0.604,1.885 0.979,2.26 0.375,0.375 10 20 0.604,1.708 0.969,2.146 0.365,0.438 10 30 0.885,4.021 1.313,4.406 0.427,0.385 10 -20 1.271,4.021 1.542,4.344 0.271,0.323 10 0 1.542,4.021 1.844,4.313 0.302,0.292 10 20 1.875,4.021 2.229,4.292 0.354,0.271 10 40 2.219,4.021 2.542,4.354 0.323,0.333 10 60 2.542,4.021 2.844,4.302 0.302,0.281 10 80 0.896,4.198 1.292,4.49 0.396,0.292 10 (-4) 1.167,4.198 1.594,4.479 0.427,0.281 10 (32) 1.469,4.198 1.885,4.521 0.417,0.323 10 (68) 1.771,4.198 2.229,4.49 0.458,0.292 10 (104) 2.167,4.198 2.677,4.531 0.51,0.333 10 (140) 2.563,4.198 3.167,4.583 0.604,0.385 10 (176) 1.865,1.813 2.292,2.177 0.427,0.365 10 *a 0.25,2.552 0.708,3 0.458,0.448 10 *b 1.771,4.406 2.094,4.667 0.323,0.26 10 *c
*a Component without harness connected
(Intake Air Temperature Sensor)
*b kΩ
*c °C (°F)


Measure the resistance of the intake air temperature sensor.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 2.21 to 2.69 kΩ
80°C (176°F) 0.29 to 0.354 kΩ


If the resistance is not as specified, replace the intake air temperature sensor.