Home › Engine / Hybrid System › K3-VE ENGINE CONTROL › MANIFOLD ABSOLUTE PRESSURE SENSOR › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002967 K3-VE ENGINE CONTROL _0014967 MANIFOLD ABSOLUTE PRESSURE SENSOR A

K3-VE ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR  REMOVAL  


PROCEDURE

Hide 89421B 1.REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR

a.
A261441

Disconnect the connector of the manifold absolute pressure sensor.


b.

Disconnect the vacuum hose.


c.

Remove the manifold absolute pressure sensor from the air cleaner assembly.